Drawers (E-Studio2020Ac/2520Ac) - Toshiba E-STUDIO 2020ac Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
 Drawers (e-STUDIO2020AC/2520AC)
 The first drawer
Open the drawer, press the paper down until the plate clicks and remove the misfed paper.
1
Check that the guide width is correct, there is no folded/curled paper or overloading (especially
2
for thick paper), and then close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides. In
particular, be sure that the upper limit for thick paper is not exceeded when placing thick paper in the first
drawer. The amount of thick paper you can load in the drawer is lower than that for plain paper.
Clearing a Paper Misfeed 27