Paper Misfeed In The Drawers - Toshiba e-studio556 Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
Close the transport guide.
5
Raise the original feeder tray, and remove the original
6
under the guide plate.
7 Lower the original feeder tray.
Close the upper cover.
8
 Paper misfeed in the drawers
Open the paper source drawer, and remove the
1
misfed paper.
Check that the guide width is correct, there is no
2
folded/curled paper or overloading, and then close
the drawer.
Be sure that the height of the stacked paper does not exceed the
line indicated inside of the side guides.
1 TROUBLESHOOTING FOR THE HARDWARE
2
1
Clearing a Paper Misfeed
1
2
17