Job Separator - Toshiba E-STUDIO 2020ac Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
 Job Separator
The procedure below is for e-STUDIO2020AC/2520AC and e-STUDIO2528A/3028A with the Job Separator installed.
However, it does not apply to e-STUDIO2525AC/3025AC/3525AC/4525AC/5525AC/6525AC and e-STUDIO3528A/4528A/
5528A/6528A Series with the Job Separator installed.
 Be careful not to let your fingers be caught between the equipment and the automatic duplexing unit cover.
This could injure you.
 Do not touch the fuser unit or the metal portion around it.
Since they are very hot, you could be burned or the shock could cause you to get your hand injured in the machine.
Open the automatic duplexing unit cover on the right.
1
2 Open the cover inside of the equipment.
Remove the misfed paper.
3
Close the cover inside of the equipment.
4
Close the automatic duplexing unit cover.
5
36 Clearing a Paper Misfeed