Editing Numerical Values - ABB REX610 Operation Manual

Section 4
Using local HMI
4.11.1
34

Editing numerical values

1. Select Main menu/Settings and then a setting.
The last digit of the value is active.
• When the symbol in front of the value is ↑, the active value can only be
increased.
• When the symbol is ↓, the active value can only be decreased.
• When the symbol in front of the value is ↕, the active value can either
be increased or decreased.
REX610
Edit group:
Active group=1
GUID-C9D80E88-1D9C-44AE-B59E-FED19DA4A010 V1 EN-US
Figure 20: Last digit is active and it can only be increased
2.
Press to increase or
One press increases or decreases the value by a certain step. For integer
values, the change is 1, 10, 100 or 1000 (...) depending on the active digit. For
decimal values, the change can be fractions 0.1, 0.01, 0.001 (...) depending on
the active digit.
For parameters with defined steps, digits smaller than the step
value cannot be edited.
3.
Press or to move the cursor to another digit.
4. To select the minimum or maximum value, select the arrow symbol in front
of the value.
•
To set the value to the maximum, press
•
To set the value to the minimum, press
REX610
Edit group:
Active group=1
GUID-CD7304EF-EB67-4F67-884E-AD5108B710F3 V1 EN-US
Figure 21: Value is set to the maximum
After pressing , the previous value can be restored by pressing
and vice versa. Another press of
! A
+_1
to decrease the value of an active digit.
! A
+_4
or
2NGA000823 A
.
.
sets the value to the lower or
Operation Manual
once,
REX610