Table of Contents
Advertisement
Otolift Stairlifts
1. Installation must be done by trained engineers.
2. Rail needs to be installed according to installation drawing.
Note that installation drawing shows backside of rail.
3. Unless otherwise indicated, all rail starts, rail ends and rail
supports needs to be fastened with supplied screws and plugs.
4. All torque settings needs to be verified with a torque wrench.
5. Use of installation tools 403060616 and 200060042 is required
for placing drive unit at rail (see chapter start).
6. "Verification tests before use" document needs to be verified
and signed. Save a copy for your own and company account.
7. All screws and nuts may only be used one time. In case of second
life always replace screws and nuts.
8. Never use screws and nuts other than specified by Otolift.
Always order screws and nuts at spareparts@otolift.com
4
Installation rules
Installation manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Modul-Air and is the answer not in the manual?
Questions and answers