Sled Setup; Setting The Angle Of Sled To The Ground - C-Dax pasture meter+ Operation Manual

Table of Contents

Advertisement

Sled Setup

Setting the angle of sled to the ground

The angle between the sled and the ground will need to be adjusted to suit the
terrain. Flat pasture with no obstacles will only require a slight angle, but this
should be increased when operating on undulating or pugged ground.
It is most important that the sled be slightly raised at front to allow easy passage
over terrain. If angled downwards, the front of the sled is likely to dig into the
ground. Particular care should be taken in conditions where stones are present to
ensure the angle of the Pasturemeter+ is set to ride over stones that might be
protruding slightly through the soil.
Please note: that the Pasturemeter+ is not
intended to be operated in conditions where it is
likely to be subject to repeated contact with
whole, large stones.
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the pasture meter+ and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents