Download Print this page

Advertisement

Quick Links

SAFETY PRECAUTIONS
AN IMPORTANT MESSAGE FOR OWNERS & OPERATORS OF SPRAY TANKS AND OTHER
Be warned of the dangers of loading your ATV or other vehicle in excess of its carrying capacity.
It is important to understand that any loads or attachments whether fastened to or placed on a vehicle or ATV will
alter the stability or handling characteristics of that vehicle or ATV.
Spray tanks or other equipment must be filled only to a level where the gross weight is within the load limit of the
ATV or other vehicle.
Safety is a primary concern in the design, manufacture, sale, and use of spray tanks and other equipment. As
manufacturers of spray tanks and other equipment we want to confirm to you, our customers, our concern for
safety. We take this opportunity to remind you about the simple, basic and common sense rules of safety when
using spray tanks and other equipment. Failure to follow these rules can result in severe injury or death to
operators and bystanders.
It is essential that everyone involved in the assembly, operation, transport, maintenance and storage of this
equipment be aware, concerned, prudent and properly trained in safety.
This also applies to equipment that is loaned or rented to someone who has not read the owner's manual and is
not familiar with the operations of applicating equipment.
NEVER EXCEED THE LOAD LIMIT CAPACITY OF THE ATV OR OTHER VEHICLE.
PLEASE NOTE THAT FILLING THE SPRAY TANK OR OTHER EQUIPMENT COMPLETELY AND OR
THE ATTACHMENT OF ADDITIONAL EQUIPMENT TO THE ATV MAY EXCEED THE ATV'S MAXIMUM
LOAD CAPACITY AND IT IS NOT RECOMMENDED TO EXCEED MANUFACTURERS GUIDELINES
CARGO SHOULD BE PROPERLY DISTRIBUTED AND SECURELY ATTACHED.
REDUCE SPEED WHEN CARRYING CARGO OR PULLING A TRAILER OR TRAILED APPLICATING
EQUIPMENT AND ALLOW GREATER DISTANCE FOR BRAKING.
NEVER ALLOW ANYONE TO RIDE ON YOUR SPRAYER OR OTHER EQUIPMENT.
ALWAYS FOLLOW THE INSTRUCTIONS IN THE OWNER'S VEHICLE MANUAL FOR CARRYING
CARGO OR PULLING A TRAILER.
PROPER MAINTENANCE IN LINE WITH MANUFACTURER'S RECOMMENDED MAINTENANCE
PROCEDURES IS ESSENTIAL.
BEFORE APPLYING CHEMICALS, READ THE LABEL OF THE CHEMICAL MANUFACTURER OR
SUPPLIER FOR PERSONAL PROTECTIVE EQUIPMENT AND OPERATE AS RECOMMENDED.
THE SAFETY OF ALL CHEMICALS USED IN AGRICULTURE IS UNDER THE JURISDICTION OF A
GOVERNMENT AGENCY, IE N.Z. MINISTRY FOR THE ENVIRONMENT; USA ENVIRONMENTAL
PROTECTION AGENCY. FURTHER LOCAL GOVERNMENT OR STATE LAWS MAY APPLY.
Throughout this manual there are highlighted text boxes containing warnings, cautions and notes.
Warnings are mandatory instructions to prevent serious injury or permanent damage.
Cautions are advisory instructions to ensure reliable operation of the equipment.
Notes are for convenient operation.
To calculate the gross weight of your sprayer, the conversion rate is 1L of water equals 1Kg.
DTK 50 Pt.No. 1003
DTK 80 Pt.No. 1004
(Pt.No.2400-1520 Issue 10, March 2020)
APPLICATING EQUIPMENT
NOTE

Advertisement

loading
Need help?

Need help?

Do you have a question about the DTK 50 and is the answer not in the manual?

Questions and answers

Summary of Contents for C-Dax DTK 50

  • Page 1 DTK 50 Pt.No. 1003 DTK 80 Pt.No. 1004 (Pt.No.2400-1520 Issue 10, March 2020) SAFETY PRECAUTIONS AN IMPORTANT MESSAGE FOR OWNERS & OPERATORS OF SPRAY TANKS AND OTHER APPLICATING EQUIPMENT Be warned of the dangers of loading your ATV or other vehicle in excess of its carrying capacity.
  • Page 2: Warranty And Liability

    The retailer is responsible for liaising with C-Dax in respect of your claim. Warranty C-Dax warrants to the original purchaser that the equipment is sold free from defects in materials and workmanship for a period of 12 months from date of first retail sale (6 months from date of first retail sale if the equipment is sold in the U.K.) subject to the...
  • Page 3 You agree that the transactions entered into between you and the retailer (and C-Dax) are for the purposes of trade and that, having regard to all relevant circumstances of...
  • Page 4: Installation

    Sprayrider™ G2 tank by two short hoses between the valves at the base of each leg. The DTK50 can mount to either front or rear on most ATV’s. WARNING C-Dax cares about your safety. Please note that the DTK80 is for rear mounting only. Always consult vehicle carrier weight limits before mounting CONTENTS...
  • Page 5: Maintenance

    Cleaning It is important to clean the sprayer regularly. After each use flush the unit out three times with fresh water. Use C-Dax neutralise for the second rinse. CAUTION To prevent damage to the sprayer and spray gun, drain the water from the sprayer and spray gun...
  • Page 6 The tank strainer is located under the lid. Always clean the strainer before filling the tank with spray solution. The C-Dax valve assembly at the base of each leg has a stainless steel mesh filter for straining the fluid before it reaches the pump.
  • Page 7 EXPLODED PARTS DIAGRAM...
  • Page 8: Exploded Parts Diagram

    EXPLODED PARTS DIAGRAM ITEM No PART No DESCRIPTION 3270-8012 Fastener-Self Tap-Screw-CSK- 8Gx1/2"-Pozi-Stainless 8427-6005 Sub-Lid & Ring Assembly-D150-C- Dax Vented-Blue-Nylon 3400-1110 Filter-Basket-D150-Mesh 7500-3400 Rota-Tank-50L-DTK-Yellow-MDPE- Incl MIG 7500-3850 Rota-Tank-80L-DTK-Yellow-MDPE- Incl MIG 7500-1500 Rota-Cover-Pump-SR50/80-Yellow- MDPE 3090-0512 Fastener-Machine-Screw-Pan- M5x12-Phillips-Stainless 8900-8410 Valve-Tap-Inline-13 Shankx13 Shank- Black-Nylon 1600-7000 Cap-Tank-Fresh Water-UnDrilled- Black...

This manual is also suitable for:

Dtk 8010031004