Table of Contents
Advertisement
OS Timer (minute) 3
Timer count set to Watch Dog Timer for OS loading.
Delayed POST (PEI
Disabled
phase)
Enabled
Enabled - Robot holds BIOS from starting POST, right after power on. This allows BIOS
POST to start with stable power or start after system is physically warmed-up.
Note: Robot does this before 'Sends watch dog'.
Delayed time
10
(second)
Period of time for Robot to hold BIOS from POST.
Delayed POST
Disabled
(DXE phase)
Enabled
Enabled - Robot holds BIOS before POST completion. This allows BIOS POST to start
with stable power or start after system is physically warmed-up. Note: Robot does this
after 'Sends watch dog before BIOS POST'.
Delayed time
10
(second)
Period of time for Robot to hold BIOS from POST.
Reset system once Disabled
Enabled
Enabled - Robot resets system for one time on each boot. This will send a soft or hard
reset to onboard devices, thus puts devices to more stable state.
Soft or hard reset Soft reset
Hard reset"
Select reset type robot should send on each boot.
Chapter 3 – AMI BIOS Setup
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
43
Advertisement
Table of Contents
