Kemper VacuFil Compact Operating Manual page 90

Extraction
capacity too
low/non-existent
Dust escapes on
the clean air side
Product/filter
does not clean
Product switches
off
Signal horn
sounds
Pos. Description
1 USB charging socket
1502872-02
Filter inserts saturated
Welding burner clogged
Filter inserts damaged
No compressed air supply
available.
Pressure/compressed air
quantity not sufficient
Temperature of a product
component too high
Extraction capacity too low Change filter insert
Tab. 29: Troubleshooting
Fig. 29: Operating control
- 90 -
Replace filter inserts
Clean the welding burner
Replace filter inserts
(only for products with
cleaning filter)
See chapter: Error codes –
digital LED display
Allow product to cool
down
Clean the welding burner
Start cleaning
(only for product with
rotating nozzle + cleaning
filter)
Pos. Description
4 LED signal lamp
EN