Setting The Extraction Capacity Regulation - Kemper VacuFil Compact Operating Manual

Display Description 1
DEL Delay
OPH Operating hours
HUS Hours Until Service Hours until maintenance
dP delta P
dPA Delta P Airflow
tP torch Pressure
CLE Cleaning processes Number of cleaning processes
rEg regulation
US 1 = US, = 0
FR Frequency
Cur Current
P Power
CH ⁰C Housing
CC ⁰C CPU
Li Limit
SFC Cleaning
SEC Service code

6.2.2 Setting the extraction capacity regulation

Automatic extraction capacity regulation is not active
With the standard product, the automatic extraction capacity regulation is
deactivated from the factory. If the extraction capacity drops, e.g. when the
filter is saturated, the extraction capacity must be corrected manually at
the rotary switch. When the rotary switch is turned, the target extraction
capacity appears for one second, then the actual extraction capacity
appears.
1502872-02
Description 2
Automatic start/stop run-on
time
Operating hours
Differential pressure of the filter
(kPA)
Pressure of the extraction
volume measurement (kPA)
Extraction pipe vacuum (kPA)
Extraction volume control is
active
Displayed units; Metric or US
Motor frequency/motor speed
Motor current
Motor power
Temperature of the side
channel compressor inside the
product
Temperature control
Set extraction volume limitation
(optional, only possible with
activated regulation)
1 = cleaning start
0 = cleaning stop
Service codes
Tab. 24: Menu
- 77 -
EN
Setting
value
Yes
Yes
Yes
Yes