Advertisement
OVERVIEW
The Radiographic Table will function reliably when maintained according to the in-
structions provided in this chapter.
Model QT-730 Radiographic Table
WARNING! Only properly trained service personnel should se
WARNING! Only properly trained service personnel should
WARNING! Only properly trained service personnel should se
vice or maintain this equipment. Failure to follow
vice or maintain this equipment. Failure to follow manufa
vice or maintain this equipment. Failure to follow manufa
turer's or service personnel's recommendations may result in s
turer's or service personnel's recommendations may result in s
turer's or service personnel's recommendations may result in
r
i
ous injury.
r
r
i
i
ous injury.
ous injury.
USER MAINTENANCE
WARNING! Always disconnect the equipment from the main
WARNING! Always disconnect the equipment from the main
WARNING! Always disconnect the equipment from the main
power supply prior to any cleaning.
power supply prior to any cleaning.
power supply prior to any cleaning.
The equipment user is responsible for the basic cleanliness of the equipment.
On a regular basis, the Radiographic Table's Table Top surface should be wiped
clean. Painted metal surfaces should be cleaned using a clean cloth slightly
moistened in warm soapy water (use mild soap). Wipe with a clean wet cloth.
CAUTION! Never use abrasive polish on this equipment.
CAUTION! Never use abrasive polish on this equipment.
CAUTION! Never use abrasive polish on this equipment.
PLANNED MAINTENANCE
Routine inspection and maintenance of the Radiographic Table should be per-
formed by qualified service personnel on an annual basis.
WARNING! Personnel engaged in maintenance activities should
WARNING! Personnel engaged in maintenance activities should
WARNING! Personnel engaged in maintenance activities should
exercise
normal caution and care while working with electro
exercise
exercise
normal caution and care while working with electro
normal caution and care while working with
mechanical equipment. Before removing or opening any electr
mechanical equipment. Before removing or opening any electr
mechanical equipment. Before removing or opening any
cal power panels or covers, verify that the incoming power
cal power panels or covers, verify that the incoming power su
cal power panels or covers, verify that the incoming power su
ply is turned OFF. In the event maintenance procedures require
ply is turned OFF. In the event maintenance procedures require
ply is turned OFF. In the event maintenance procedures require
power to be supplied to the unit, extreme care MUST be
power to be supplied to the unit, extreme care MUST be exe
power to be supplied to the unit, extreme care MUST be exe
cised to insure the safety of service or other personnel in the
cised to insure the safety of service or other personnel in the
cised to insure the safety of service or other personnel in the
area. Verify that the equipment is properly grounded before
area. Verify that the equipment is properly grounded before a
area. Verify that the equipment is properly grounded before a
tempting any electrical operation.
tempting any electrical operation.
tempting any electrical operation.
Chapter 5 Maintenance
manufac-
ser-
r-
r-
c-
c-
se-
e-
e-
electro-
-
-
electri-
i-
i-
sup-
p-
p-
exer-
r-
r-
at-
t-
t-
29
Advertisement
Need help?
Do you have a question about the QT-730 Series and is the answer not in the manual?