Technical Data; Noise Information - Worx D-LITE WX104 Original Instructions Manual

* Not all the accessories illustrated or described are
included in standard delivery.

TECHNICAL DATA

Type designation WX104 WX104.2 (1-designation of
machinery, representative of hand hold drill )
Voltage
No load speed
Max torque
Chuck capacity
Steel
Max. drilling capacity
Wood
Charger input
Charger output
Machine weight
**Voltage measured without workload. Initial battery voltage
reaches maximum of 12 volts. Nominal voltage is 10.8 volts.
ACCESSORIES
1A Charger
25mm screwdriver bits
magnetic holder
HSS drill bit
12V Max**
0-900/min
15N.m
10mm
6mm
16mm
100-240V~50/60Hz,24W
12.6-13.6V 1000mA
1.0 kg
WX104 WX104.2
1 1
10 10
1 1
2 3
Power nut driver
Sleeve tie
Soft shaft
We recommend that you purchase your accessories listed in the
above list from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store personnel can
assist you and offer advice.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value
a
Drilling into metal
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared noise
emission value have been measured in accordance with a
standard test method and may be used for comparing one
tool with another.
The declared vibration total valueand the declared noise
emission valuemay also be used in a preliminary assessment
of exposure.
/ 2
/ 1
/ 1
L : 74.4dB(A)
pA
L : 85.4dB(A)
wA
5.0dB(A)
= 3.3m/s²
h,D
EN
13