Technical Data; Noise Information; Vibration Information - Worx WX102.X Series Manual

TECHNICAL DATA

Type WX102 WX102.X (1-designation of machinery,
representative of Cordless Drill)
Voltage
No load speed
Number of clutch
positions
Max torque
Chuck capacity
Steel
Max. drilling
capacity
Wood
Machine weight (bare
tool)
**X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes between
these models
*** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage is
18 volts.

NOISE INFORMATION

A weighted sound pressure
K = 5 dB (A)
pA
A weighted sound power
K = 5 dB (A)
WA
Wear ear protection

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value
a = 1.991 m/s²
Drilling into metal
h,D
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared noise
emission value have been measured in accordance with a
standard test method and may be used for comparing one
tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
20V Cordless Drill Driver
WX102 WX102.X**
20 V Max***
0-450/0-2000 RPM
18+1
60 Nm
13 mm
13 mm
40 mm
1.1 kg
L = 83.0 dB (A)
PA
L = 94.0 dB (A)
WA
WARNING: The vibration and noise emissions during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool is
used especially what kind of workpiece is processed
dependant on the following examples and other variations
on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome if
its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use should
also take account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle but not actually doing the job. This may
significantly reduce the exposure level over the total
working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
Category
20V Battery
20V Charger
We recommend that you purchase your accessories from
the same store that sold you the tool. Refer to the accessory
packaging for further details. Store personnel can assist you
and offer advice.
Model Capacity
WA3550 1.5 Ah
WA3550.1 1.5 Ah
WA3551 2.0 Ah
WA3551.1 2.0 Ah
WA3553 4.0 Ah
WA3760 0.4 A
WA3869 2.0 A
WA3880 2.0 A
EN
9