AT&T CRL32102 Quick Start Manual

Quick start guide
CRL32102/CRL32202/CRL32302/CRL32352/CRL32452
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your Abridged user's
manual provided in the package, or see the online Complete
user's manual at www.telephones.att.com/manuals.
Telephone base installation
Charger installation
Plug the power
adapter into an
electrical outlet not
controlled by a wall
switch.
Caution: Use only the power adapter(s) provided with this product. To obtain a replacement,
www.telephones.att.com
visit our website at
1 (866) 288-4268
In Canada, dial .
Battery installation
Install the battery, as shown below. Charge your handset(s) before initial use.
The battery is fully charged after 10 hours of continuous charging.
1. Plug the battery connector securely into the socket inside the handset battery
compartment. Insert the supplied battery with the label THIS SIDE UP facing
up, as indicated.
2. Align the cover flat against the battery
compartment, then slide it upwards until it clicks
into place.
Use only the supplied rechargeable battery or replacement battery (model BT183342).
Quick reference guide
q
CID/VOLUME
• Show caller ID history.
• Scroll down in menus.
• Move cursor to the left when
entering names or numbers.
• Decrease listening volume when
on a call, or decrease message
playback volume.
Plug the other end of the
REDIAL/PAUSE
telephone line cord into a
• Press repeatedly to view the last
telephone jack or a DSL filter.
10 numbers dialed.
• Press and hold to insert a dialing
pause while entering numbers.
PHONE/FLASH
• Make or answer a call.
• Answer a call waiting call during
a call.
If you have DSL
high-speed Internet service,
1
a DSL filter (not included)
• Press repeatedly to add or remove
is required. The DSL filter
1 in front of the call log entry
before dialing or saving it to the
must be plugged into the
directory.
telephone wall jack.
• Press and hold to set or dial your
voicemail number.
Plug the power cord
and telephone line
TONE
cord into the jacks.
Press to switch to tone dialing
temporarily during a call if you have
Route the cords
pulse service.
through the slots.
/SPEA�ER SPEA�ER
Switch between the speakerphone
1 (800) 222-3111 and handset.
or call .
Handset
side view
Message counter
Shows the number
3. Charge the handset by
of messages or other
placing it face forward
answering system
in the telephone base information.
or charger.
/REPEAT
• Repeat a message.
• Press twice to play the
previous message.
X/DELETE
• Delete the message
currently playing.
• Press twice to delete all
old messages when in idle
mode.
Audio Assist is a registered trademark of Advanced American Telephones.
Handset
pDIR/VOLUME
• Show directory entries.
• Scroll up in menus.
• Move cursor to the right when
entering names or numbers.
• Increase listening volume when
on a call, or increase message
playback volume.
MENU/SELECT
• Show the menu.
• Select an item or save an entry or
setting while in the menu.
OFF/CANCEL
• Hang up a call.
• Press to cancel an operation, back
up to the previous menu, or exit the
menu display; or press and hold to
return to idle mode
• Press and hold in idle mode to
erase missed call indicator.
#
QUIET (pound key)
• Press repeatedly to display other
dialing options when reviewing a
caller ID log entry.
• Press and hold to set quiet mode.
AUDIO ASSIST
During a call, press to enhance the
clarity and loudness of your caller's
voice.
MUTE/DELETE
• Mute the microphone during a call.
• Delete the displayed entry while in
the directory, call log or redial list.
• Delete digits or characters when
using the dialing keys.
EQ
Change the audio quality to best
suit your hearing.
Telephone base
/S�IP
Skip to the next message.
q/VOL/p
• Adjust the listening
volume during message
playback.
• Adjust the base ringer
volume when in idle
mode.
/PLAY/STOP
Start or stop message
playback.
/ANS ON
SLOW
Turn the built-in
Press to reduce the
answering system
playback speed.
on or off.
Initial settings
We recommend you program your telephone system before use.
The following are a few examples of common features to set before using the
telephone. Refer to the Handset settings and Answering system settings in
the Abridged user's manual or the online Complete user's manual for detailed
instructions on setting all telephone features.
Set date/time
Set the date/time before using the answering system.
1. MENU -> q or p -> Set date/time -> SELECT.
2. Enter the month, day and year using the dialing keys -> SELECT.
3. Enter the hour and minute using the dialing keys.
4. q or p to choose AM or PM -> SELECT.
Record your own announcement
Your outgoing announcement plays when calls are answered by the answering
system. You can use the preset announcement to answer calls, or replace it
with your own recorded announcement.
1. MENU -> q or p -> Answering sys -> SELECT.
2. SELECT to select Announcement.
3. SELECT to select Record annc.
4. Facing the handset, record your announcement and press 5 to end recording.
Number of rings
You can set the answering system to answer an incoming call after two, three,
four, five or six rings, or toll saver. If you choose toll saver, the answering
system answers a call after two rings if you have new messages, or after four
rings when there are no new messages. This enables you to check for new
messages and avoid paying unnecessary long distance charges if you are
calling from out of your local area.
If you want the built-in answering system instead of the voicemail to answer a
call, you should set the answering system to answer a call at least two rings
before the voicemail is set to answer. Contact your telephone service provider
for information on your voicemail settings.
1. MENU -> q or p -> Answering sys -> SELECT.
2. q or p -> Ans sys setup -> SELECT.
3. q or p -> # of rings -> SELECT.
4. q or p -> choose among 2, 3, 4, 5, 6 or Toll saver -> SELECT.
Handset ringer volume
You can set the ringer volume level to one of the six levels or turn the
ringer off.
1. MENU -> q or p -> Ringers -> SELECT.
2. SELECT to select Ringer volume.
3. q or p to choose the desired level -> SELECT.
Reset language to English
If you have accidentally changed the screen display language and want to
switch it back to English, follow the steps.
• MENU in idle mode-> enter 364#.