Step 7: Open Your Application; Step 8: Scan Data Into A Windows Program - Socket 5 Series User Manual

STEP 7: O Y
PEN
1. Start the Windows application you want to receive the data,
such as Notepad, Word or Excel. Make sure a new document
or spreadsheet is open that you can scan data into.
2. Place the cursor where you would like SocketScan to feed
data from the next scan.
STEP 8: S D
CAN
1. Press the assigned trigger button and scan the bar code. Make
sure the red beam covers the enter width of the bar code
Important! Do not look directly into the beam or point it at a
person!
2. When data is read, a beep should sound, and the scanner
beam should turn off indicating a good read. If the CF Scan
Card fails to read data within a few seconds, the scanner
beam will turn off, and you must try again.
3. After a successful scan, data should appear in your document.
By default, the cursor will automatically advance to the next
line or cell, ready for the next scan.
32
A
OUR PPLICATION
Y A
ATA INTO OUR PPLICATION