Step 4: Assign A Trigger Button - Socket 5 Series User Manual

STEP 4: A
SSIGN A
Refer to your device's user manual for complete instructions.
Note:
• If SocketScan is not running, pressing the assigned trigger
button will launch SocketScan. Pressing the trigger button
will initialize the scanner only if SocketScan is open.
• If it is inconvenient/impossible to assign a hardware button on
your device, you can install SocketScan Trigger software from
the installation CD to have a software trigger button.
1. Tap Start | Settings | Buttons.
2. From the Button list, select a button to trigger the CF Scan
Card. In the drop-down menu, select SocketScan. When
done, tap ok.
IMPORTANT! Be sure to select SocketScan. Do not select the
programs Socket Read RFID, Socket Read Bar Code or Socket
Trigger Select, which are for the CF RFID Reader-Scan Card.
C 2: S
HAPTER ETUP FOR
T B
RIGGER UTTON
W M
INDOWS OBILE
For maximum ergonomic
placement, choose a button
located directly beneath your
thumb or forefinger when you
hold the Pocket PC. For the
SoMo 650, the Left and Right
side buttons are good choices.
13