S
S
YMBOLOGY
ELECTOR
The applet makes it easy to select which symbologies you want
the scanner to recognize. By default, the scanner is set to
recognize nine of the most common symbologies.
1. Tap on the SocketScan icon. In the pop-up menu, tap Symbology
Selector...
2. In the screen that appears, check the symbologies you wish to
enable. Uncheck those you wish to disable. Tap ok.
Note: Enabling all possible symbologies will make the decode
process slightly longer.
C
2: S
HAPTER
ETUP FOR
W
M
INDOWS
OBILE
17