Victory 4x4 UNIVERSAL Install Instructions

Adventure carrier ladder

UNIVE RS AL

ADV E NT URE C ARR I E R

L ADD E R

INS TAL L I NSTRUC T ION S

Please read the mounting instructions below carefully before attempting to install.

Be sure to check out the install video on the product page, if available.

Thank you for purchasing from Victory 4x4! Checkout our website, victory4x4.com for other great off-road

products. Be sure to rate and review our product online. If you have any questions or are missing parts, please

don't hesitate to call us at 269-459-8447!

Table of Contents

Need help?

Do you have a question about the UNIVERSAL and is the answer not in the manual?

Page 1 Be sure to check out the install video on the product page, if available. Thank you for purchasing from Victory 4x4! Checkout our website, victory4x4.com for other great off-road products. Be sure to rate and review our product online. If you have any questions or are missing parts, please...
Page 2 I NCLU D E D HARDWARE 3/8”-16 Serr. Flange Nut 3/8”-16 X 3/4” Button Head...
Page 3 I NCLU D E D PARTS...
Page 4 I NS TA LL ATI ON Start by mounting the ladder to the outside edge of the left carrier. Simply insert the 3/8”-16 serr. flange nuts into the cutouts in the inside of the adventure carrier and hold them over the holes on the inside of the carrier and thread the 3/8”-16 X 3/4”...
Page 5 I NS TA L L AT I O N To finish the assembly, bolt the bottom step into the holes in the arm of the carrier, underneath the ladder using the 3/8”-16 X 3/4” button head bolts on the outside and of the carrier and the 3/8”-16 serr. flange nuts on the inside.