Page 21
BIOS SETTING LANGUAGE EXIT August 粚 2020/08/07 FAN PROFILE System Information Model: CPU Temperature +31℃ CPU Voltage:0.916V BATTLE-AX H410M-PT PRO V20 CPU Fan1 SYS Fan1 CPU: Intel(R)Core(TM)i5-10400F 2319 RPM 0 RPM CPU@2.90GHz Total Memory: 4096MB(DDR4) Memory Motherboard Voltage:1.265V Temperature:+36℃ BIOS Version: 1003-2020/08/03 Version Time: 2020/08/03 鲳叙...
Page 22
BATTLE-AX H410M-PT PRO V20 LANGUAGE ADVANCED BIOS SETTING EXIT August 2020/08/07 CPU OverClocking Frequency Temperature Configuration Enabled EIST 3999.12MHZ +31℃ Memory Power Limit 1 Override Enabled Configuration Ext.Frequency Voltage 100.00MHZ 0.916V Power Limit 1 Value Maximum Power Limit 1 Time Window >Power Limit 3 Settings...
Page 23
BIOS Power Limit 3-4 Settings CPU 娃鑝 奓 3-4ㄌ Boot performance Mode 岔娐犉 莲炩ㄌ 樾嗥繟 Max Battery 繎擌靅蟌 ㄋMax Non-Turbo Performance 繎擌 Turbo 筦 ㄋTurbo Performance Turbo 筦 ㄌ TDP LOCK TDP 娃 奓ㄌ 樾嗥繟 Disabledㄋ Enabledㄌ CPU Ratio CPU 喐 ㄌ Memory Configuration 堸榵...
BATTLE-AX H410M-PT PRO V20 Read to Precharge tRTP 睆 埋靅粚 ㄌ Row Cycle tRC 鸏"SDRAM 峬纉粚 " 樍⺯媨睉 嬽埈 埋靅奉赠褙憄堸馯箪劝 龆瘺 馯繎欪馯粚 峬纉箤ㄌ Write Recover Time TWR 睆 DRAM 馣焲繎屜剣塔堃箤研屜馯塔堃愌撑粚 孭繎屜剣塔堃箤研勏 屜馯 埋靅粚 ㄌ RAS/RAS Delay TRRD TRRD 鸏" 嬽埈奉 嬽埈馯災粚"ㄌ 嗥勮 鸏屟驨屗馯 bank 务馯屗剣劝 嬽...
Page 25
BIOS 4-3-1 Advanced BIOS LAN Configuration Onboard LAN Controller 炏岔痰堟 缟 ⼦硹奓怸ㄌ 樾嗥繟 ONㄋ OFFㄌ Launch PXE OpROM 炏岔痰堟 籹騰岔娐ㄌ 樾嗥繟 DisabledㄋUEFI onlyㄋLegacy onlyㄌ PC Health status 靅 嘰濼錆牒 Smart Fan Select 睆嶪劝 癋岔霳絬 ㄌ 樾嗥繟 CPU Fan CPU 癋 ㄋSYS Fan 癋...
Page 26
BATTLE-AX H410M-PT PRO V20 Restore AC Power Loss 簓靅屜塁绷靅 PC 馯錆牒ㄌ 樾嗥繟 Power Off 堟纸 ㄋPower On 炏 纸 ㄋLast State 副蕾簓靅粚馯錆牒 ㄌ ACPI Settings ACPI ACPI Sleep State 睆 OS 剰熅纸莲炩ㄌ 樾嗥繟 Suspend DisabledㄋS3 Suspend to RAM ㄌ CPU Configuration CPU Active Processor Cores 赠褙撁锐怸聈燭劝箤ㄌ...
Page 27
BIOS Legacy USB Support 炏岔痰堟 吗 撆娃 ㄌ 咦霳 USB 騰/ 翶燯 劵"Enabled"ㄌ 樾嗥繟 EnabledㄋDisabledㄌ Super IO Configuration Serial Port 1 Configuration 輷壾"Serial Port 1 Configuration" 欙壽钗叀剰劕劝榦 Serial Port 岔娐崡堟 努尞硹奓怸ㄌ 樾嗥繟 DisabledㄋEnabledㄌ Change Settings 縻筒 藷 霳绷筒尊努尞憍憣ㄌ Trusted Computing 尰啈 TPM Support 炏岔痰堟...
Page 28
BATTLE-AX H410M-PT PRO V20 PCH Configuration 嬿肐 HD Audio 炏岔痰堟 唾骢 硹奓怸ㄌ 樾嗥繟 DisabledㄋEnabledㄌ Case Open Warning 纸 癣炏 峄ㄌ 樾嗥繟 Disabled 麒霳 ㄋEnabled 岔霳 ㄋClear 詙 ㄌ ME Configuration ME ME Control 炏岔痰堟 ME 愻叙ㄌ 樾嗥繟 DisabledㄋEnabledㄌ ME FW Version 納鸏...
BIOS 壽 Exit 壽 媨睉 狦撑 /唾榵澃 岔/割唾榵澃 壽ㄌ ADVANCED BIOS SETTING LANGUAGE EXIT August 2020/08/07 EXIT Options Frequency Temperature 3999.12MHZ +31℃ Voltage Ext.Frequency 100.00MHZ 0.916V Load Optimized Default MEMORY Save Changes&Reset Frequency Voltage 2133MHZ 1.265V Login Micro Blog Scan QRC Code Discard Changes&Exit @七彩虹科技...
Colorful company reserves the finally explanatory rights. Motherboard Features BATTLE-AX H410M-PT PRO V20 motherboard based on Intel H410 chipset, support Intel LGA1200 Comet Lake-S processors,support DDR4-2933/2800/ 2666/2400/2133MHz memory, support PCI-E3.0 standard. The motherboard has 2*DDR4 memory slots,1*HDMI port,1*DVI port,1*VGA port,2*COM port(include header),4*SATA3.0 ports,onboard ALC887 audio...
Page 33
Introduction Memory Offer 2 DIMM slots,support XMP memory and DDR4 dual channel Support DDR4-2933/2800/2666/2400/2133 MHz memory the maximum supported capacity of a single memory slot is 32GB, and the total memory capacity is 64GB Warm tip: the frequency of memory overclocking also depends on the performance of matching CPU and memory itself! Slots 2*PCI Express 3.0x1 slots...
Page 34
BATTLE-AX H410M-PT PRO V20 Motherboard Layout This is for your reference only...
Hardware Installation 5-2 Hardware Installation This section will guide you through the installation of the motherboard. The topics covered in this section are: Preparing the motherboard Installing the CPU Installing the CPU fan Installing the memory Installing the motherboard Connecting cables and setting switches 5-2-1 Safety Instructions To reduce the risk of fire, electric shock, and injury, always follow basic safety precautions.
Page 36
BATTLE-AX H410M-PT PRO V20 There are many different fan types that can be used with this motherboard. Follow the instruction that came with you fan assembly. Be sure that the fan orientation is correct for your chassis type and your fan assembly.
Page 37
Hardware Installation The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 5-2-2 Installing Memory DIMMs Your new motherboard has 4 slots for DDR4 memory. They support dual channel DDR4 memory technology.
Page 38
BATTLE-AX H410M-PT PRO V20 the connections. Use the following procedure to install the I/O shield and secure the motherboard into the chassis. Be sure that the CPU fan assembly has enough clearance for the chassis covers to lock into place and for the expansion cards. Also make sure the CPU Fan assembly is aligned with the vents on the covers.
Page 39
Hardware Installation Internal Headers Front panel USB Headers Audio Serial ATA III Chassis Fans Rear panel USB 2.0 Adapter Expansion slots Serial ATA 3.0 6Gb/s connectors (7-pin) These connectors connect to Serial ATA 3.0 6Gb/s hard disk drives and optical drives via Serial ATA 3.0 6Gb/s signal cables.
Page 40
BATTLE-AX H410M-PT PRO V20 USB3.2 Gen1 connectors USB3F This connector is for USB3.2 Gen1 devices.These USB connectors can up to 5Gb/s connection speed,can be downwards compatible with USB2.0/1.1 devices. Noted:USB3.2 Gen1 (USB3F) and USB2.0(FUSB3) header share the same signal and cannot be used at the same time.
Page 41
Hardware Installation ATX power connectors (24-pin ATXPWR, 8-pin ATX12V, 4-pin ATX12V) These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
Page 42
BATTLE-AX H410M-PT PRO V20 System panel connector This connector supports several chassis-mounted functions. PWR_LED:System power LED This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
Page 43
Hardware Installation Fan connectors (CPU_FAN, SYS_FAN) Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. PCI Express Slot The PCI Express x16 slot is reserved for a graphics or video card. When installing a PCI Express x16 card, be sure the retention clip snaps and locks the card into place.
Page 44
BATTLE-AX H410M-PT PRO V20 M.2 Slot The motherboard has one M.2 slot support PCI-e x2 & SATA SSD and 2260/2280 size. Please install M.2 SSD correctly in the slot following the following steps: 1. please use a screwdriver to remove the screws and studs in order, and then lock the stud first when the actual M.2 SSD is found to be suitable...
Page 45
Hardware Installation Clear CMOS Jumper: CLR_CMOS There is a CMOS RAM on board that has a power supply from external battery to keep the system configuration data. With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you want to clear the system configuration, use the CLR_CMOS Jumper to clear data.
Page 46
The LPT header is for printer or scanner devices. Back Panel IO Connector HDMI USB3.2 Gen1 USB2.0 AUDIO <The back panel IO connector of BATTLE-AX H410M-PT PRO V20> Parts PS/2 Mouse/ Keyboard This connector is for a PS/2 mouse/Keyboard. Connector LAN Jack The standard RJ-45 jack is for connection to single Local Area Network (LAN).
Hardware Installation Line Out(Green) This connector for speakers or headphones. Side R/L(Gray) Side surround speakers connector Onboard COM port, connect to COM devices Onboard VGA port, connect to VGA Monitor Onboard DVI port, connect to DVI Monitor HDMI Onboard HDMI port, connect to HDMI Monitor These connectors are for attaching USB devices such as USB Ports keyboard, mouse, or other USB-compatible devices.
BATTLE-AX H410M-PT PRO V20 5-4 BIOS Setting This chapter introduces how to change the system settings through BIOS settings. Please refer to this chapter for details. The chapter contains the following: BIOS Main Menu OC OverClock Settings Advanced Advanced BIOS Features...
Page 49
BIOS SETTING LANGUAGE EXIT date August 2020/08/07 FAN PROFILE System Information Model: CPU Temperature +31℃ CPU Voltage:0.916V BATTLE-AX H410M-PT PRO V20 CPU Fan1 SYS Fan1 CPU: Intel(R)Core(TM)i5-10400F 2319 RPM 0 RPM CPU@2.90GHz Total Memory: 4096MB(DDR4) Memory Motherboard Voltage:1.265V Temperature:+36℃ BIOS Version: 1003-2020/08/03...
Page 50
BATTLE-AX H410M-PT PRO V20 5-4-2 OverClock Settings(OC) ADVANCED BIOS SETTING LANGUAGE EXIT August 2020/08/07 CPU OverClocking Frequency Temperature Configuration EIST Enabled 3999.12MHZ +31℃ Memory Power Limit 1 Override Enabled Configuration Ext.Frequency Voltage 100.00MHZ 0.916V Power Limit 1 Value Maximum Power Limit 1 Time Window >Power Limit 3 Settings...
Page 51
BIOS Setting Power Limit 3-4 Settings Set CPU power limit 3-4. Boot performance Mode Set the startup performance mode.Options:Max Battery,Max Non-Turbo Performance,Turbo Performance. TDP LOCK Set TDP power limit. Options: Disabledㄋ Enabled. CPU Ratio Set CPU ratio. Memory Configuration Memory overclocking function settings Memory Profiles memory parameter setting Set memory timings.Options:Default Profile AUTO...
Page 52
BATTLE-AX H410M-PT PRO V20 ROW Precharge Time (tRP) This project is used to control how long after the Precharge command is sent out by SDRAM, the command must not be sent out again. It is recommended that you use default values to keep the system stable.
Page 53
BIOS Setting 5-4-3 ADVANCED settings ADVANCED BIOS SETTING LANGUAGE EXIT August 2020/08/07 Advanced 》LAN Configuration Frequency Temperature Chipset 3999.12MHZ +31℃ 》PC Health status Security Ext.Frequency Voltage 》Power Management setup 100.00MHZ 0.916V Boot 》ACPI Settings Password 》CPU Configuration Setting MEMORY 》SATA Configuration Frequency Voltage 》USB Configuration...
Page 54
BATTLE-AX H410M-PT PRO V20 Power Management Setup Resume By RING Set RING wake-up.Options:DisabledㄋEnabled. Resume By PME Set PME wake-up.Options:DisabledㄋEnabled. Resume By USB Set USB wake-up.Options:DisabledㄋEnabled. Resume By PS2 KB Set PS2 Keyboard wake-up.Options:DisabledㄋEnabled. Resume By PS2 MS Set PS2 Mouse wake-up.Options:DisabledㄋEnabled.
Page 55
BIOS Setting Limit CPUID Maximum Set to open or close the maximum CPUID instruction limit. Options:Disabled, Enabled. Intel VMX Virtualization Technology Set to open or close the Intel virtualization technology. Intel virtualization technology allows you to separate partitions of data on the same platform, performing multiple operating systems and applications.Options:DisabledㄋEnabled.
Page 56
BATTLE-AX H410M-PT PRO V20 Serial Port Start and close the serial port controller. Options:DisabledㄋEnabled. Change Settings This option is used to change the serial address. Trusted Computing TPM Support Open or close the TPM (system under the built-inencryption) function.TPM standard security chip, and can effectively protect the PC, to prevent illegal users access.Options:DisabledㄋEnabledㄌ...
Page 57
BIOS Setting Case Open Warning Set the alarm when the case has been opened. Options:DisabledㄋEnabledㄋClear. ME Configuration ME Control Set to open or close the ME firmware. Options:DisabledㄋEnabledㄌ ME FW Version Displays ME the FW version. 5-4-3-3 Security Secure Boot Set the secure boot.Options:DisabledㄋEnabled.
Page 58
BATTLE-AX H410M-PT PRO V20 5-4-3-5 Password Setting Administrator Password This project is used to set the system administrator password. Please follow these steps: 1.Select"Administrator Password"and press the "Enter" button. 2. When"Greate New Password"appears enter the password you want to set, which can be in six bytes in English, numbers and symbols, and then press the "Enter"...
Page 59
BIOS Setting 5-4-4 BIOS setting upgrade BIOS Options include: upgrade BIOS from U disk, backup original BIOS to U disk, download and upgrade BIOS from network LANGUAGE ADVANCED BIOS SETTING EXIT August 2020/08/07 EZ BIOS Flash BIOS Update Frequency Temperature 3999.12MHZ +31℃...
Page 60
BATTLE-AX H410M-PT PRO V20 5-4-6 Exit exit Settings The exit options include restore default / save and restart / do not save and exit. ADVANCED BIOS SETTING LANGUAGE EXIT August 2020/08/07 EXIT Options Frequency Temperature 3999.12MHZ +31℃ Voltage Ext.Frequency 100.00MHZ 0.916V...
Page 61
The material in this document is the intellectual property of Colorful Technology and Development CO, LTD. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
Page 62
Or our engineer, send the follow information to us! Customer name Purchase date Contacts Contact phone Contact address Product model Product SN Dealer name Dealer phone Dealer address Website: www.colorful.cn Service hotline: +86400-678-586...
Need help?
Do you have a question about the BATTLE-AX H410M-PT PRO V20 and is the answer not in the manual?
Questions and answers