Page 25
勮尰叀屗粚睹剰 <Ctrl> + <Alt>+<Delete> 绷 岔靅 ㄌ BIOS 劶靨 癋啈狾寷 娃 嬽 ADVANCED BIOS SETTING LANGUAGE EXIT 粚 FAN PROFILE System Information Model:BATTLE-AX Z490M-PLUS V20 CPU Temperature +41℃ CPU Voltage:0.916V CFAN2 CFAN1 CPU: Intel(R)Core(TM)i5-10400F 0 RPM 2319 RPM CPU@2.90GHz Total Memory:4096MB(DDR4) Memory Motherboard Voltage:1.265V...
Page 26
BATTLE-AX Z490M-PLUS V20 LANGUAGE ADVANCED BIOS SETTING EXIT CPU OverClocking Frequency Temperature Configuration OverClocking Feature Disabled 2892.19MHZ +41℃ Intel(R)Core(TM)i5-10400F CPU@2.90GHz Memory Configuration Ext.Frequency Voltage BCLK Frequency 99.780MHZ 100.00MHZ 0.916V Over Voltage CPU Power Limit 65.0 Configuration Package Power Limit 134.0...
Page 27
BIOS Turbo Mode 鬽 莲炩ㄌ 樾嗥繟 Disabledㄋ Enabledㄌ CPU Power Limit CPU 娃 奓ㄌ Package Power Limit CPU 哔靅馯娃 奓ㄌ0 蠰繟 騮 嗥 嬽呕劵 1/1000W 敱 12500 孭劵 12.50W 叀藷 硼ㄌ Core Max OC Ratio CPU 繎擌 喐 愱 0-255ㄌ Memory Configuration 堸榵...
Page 28
BATTLE-AX Z490M-PLUS V20 Min Active RAS tRAS SDRAM 堸榵 埋靅災 藷 硹奓 S D R A M 堸榵粚 峬纉箤馯 R A S 繎欪嗥ㄌ Read to Precharge tRTP 睆 埋靅粚 ㄌ Row Cycle tRC 鸏"SDRAM 峬纉粚 " 樍⺯媨睉 嬽埈 埋靅奉赠褙憄堸馯箪劝 龆瘺...
BATTLE-AX Z490M-PLUS V20 LANGUAGE BIOS 馯 靨 ㄌ 樾嗥繟 Englishㄋ务篎 ㄌ ADVANCED BIOS SETTING LANGUAGE EXIT Frequency Temperature 2892.19MHZ +41℃ 繁體中文 English 简体中文 한국어 Ext.Frequency Voltage 100.00MHZ 0.916V Việt Nam Español Deutsch 日本語 MEMORY Frequency Voltage 2133MHZ 1.265V VOLTAGE +3.3V VBAT +3.328V...
The package contents above are for reference only and subject to change without notice,specific please in kind prevail! Colorful company reserves the finally explanatory rights. Motherboard Features BATTLE-AX Z490M-PLUS V20 motherboard based on Intel Z490 chipset, support Intel LGA1200 Comet Lake-S processors support DDR4-4000 OC /3800(OC)/3600(OC)/3400(OC)/3200(OC)/3000(OC)/2800/(OC)/2666/2400/ 2133MHz memory, support PCI-E3.0 standard.
Page 38
BATTLE-AX Z490M-PLUS V20 Tips:when using 95W processor, please match the professional CPU cooling fan! Memory Offer 4 DIMM slots,support XMP memory and DDR4 dual channel Support DDR4-4000(OC)/3800(OC)/3600(OC)/3400 (OC)/3200(OC)/3000(OC)/2800 OC)/2666/2400/2133 MHz memory the maximum supported capacity of a single memory slot is...
Hardware Installation 5-2 Hardware Installation This section will guide you through the installation of the motherboard. The topics covered in this section are: Preparing the motherboard Installing the CPU Installing the CPU fan Installing the memory Installing the motherboard Connecting cables and setting switches 5-2-1 Safety Instructions To reduce the risk of fire, electric shock, and injury, always follow basic safety precautions.
Page 42
BATTLE-AX Z490M-PLUS V20 There are many different fan types that can be used with this motherboard. Follow the instruction that came with you fan assembly. Be sure that the fan orientation is correct for your chassis type and your fan assembly.
Page 43
Hardware Installation The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 5-2-2 Installing Memory DIMMs Your new motherboard has 4 slots for DDR4 memory. They support dual channel DDR4 memory technology.
Page 44
BATTLE-AX Z490M-PLUS V20 5-2-3 Installing the Motherboard The sequence of installing the motherboard into the chassis depends on the chassis you are using and if you are replacing an existing motherboard or working with an empty chassis. Determine if it would be easier to make all the connections prior to this step or to secure the motherboard and then make all the connections.
Page 45
Hardware Installation 5-2-4 Connecting header and Setting Switches This section takes you through all the connections and switch settings necessary on the motherboard. This will include: Power Connections 24-pin ATX power 8-pin ATX 12V power Internal Headers Front panel USB Headers Audio Serial ATA III Chassis Fans...
Page 46
BATTLE-AX Z490M-PLUS V20 USB3.2 Gen1 connectors This connector is for USB3.2 devices.These USB connectors can up to 5Gb/s connection speed,can be downwards compatible with USB2.0/1.1 devices. USB2.0 connectors These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
Page 47
Hardware Installation ATX power connectors (24-pin ATXPWR, 8-pin ATX12V, 4-pin ATX12V) These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
Page 48
BATTLE-AX Z490M-PLUS V20 System panel connector This connector supports several chassis-mounted functions. System power LED (2-pin PWR_LED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
Page 49
Hardware Installation Fan connectors (CFAN1 CFAN2 SFAN1 SFAN2) Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. PCI Express Slot The PCI Express x16 slot is reserved for a graphics or video card. Support for 2-way AMD CrossFire Technology(16+4)X.The bandwidth of the x16 slot is up to 4GB/sec (8GB/sec concurrent).
Page 50
BATTLE-AX Z490M-PLUS V20 M.2 Slot The motherboard has two M.2 slots screen as "M2-KEYM2" slot, support PCI-e x4 NVME SSD, silk screen as "PCIE-SATA" slot, support PCI-e x4 NVME and SATA SSD.Support 2242/2260/2280 size SSD and Intel OPTANE technology the Data transmission rate is up to 32Gb/s.
Page 51
Hardware Installation WIFI/BT module slot: The motherboard has one CNVI WIFI/BT module slot,support 2230 size CNVI WiFi/BT module. COM header This COM header is for COM serial devices.
Page 52
BATTLE-AX Z490M-PLUS V20 Clear CMOS Jumper: CLR_CMOS There is a CMOS RAM on board that has a power supply from external battery to keep the system configuration data. With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you want to clear the system configuration, use the CLR_CMOS Jumper to clear data.
Page 53
Hardware Installation SPEAK header: This SPEAK header is for Speaker serial devices. PS2 mouse/keyboard wake up header(JKB1) To turn on the ps2 mouse / keyboard wake-up function, the jumper cap should be placed on pin pin2-3, and the ps2 mouse / keyboard wake-up function should also be turned on in BIOS settings.
Page 54
BATTLE-AX Z490M-PLUS V20 12V 4-Pin RGB FAN headers: The motherboard provides one 12V RGB fan header.When installing, the direction marked by the arrow on the connecting line should be aligned with the first pin of the header (the pin marked "12V" on the PCB board).
Hardware Installation devices. Line Out(Green) This connector for speakers or headphones. Side R/L(Gray) Side surround speakers connector Onboard DP port, connect to DP Monitor Onboard HDMI, connect to HDMI Monitor HDMI These connectors are for attaching USB devices such as USB Ports keyboard, mouse, or other USB-compatible devices.
BATTLE-AX Z490M-PLUS V20 5-4 BIOS Setting This chapter introduces how to change the system settings through BIOS settings. Please refer to this chapter for details. The chapter contains the following: BIOS Main Menu OC OverClock Settings Advanced Advanced BIOS Features...
Page 57
The BIOS settings can be operated with the mouse. Function menu Fan info and setting System ADVANCED BIOS SETTING LANGUAGE EXIT date FAN PROFILE System Information Model:BATTLE-AX Z490M-PLUS V20 CPU Temperature +41℃ CPU Voltage:0.916V CFAN2 CFAN1 CPU: Intel(R)Core(TM)i5-10400F 0 RPM 2319 RPM CPU@2.90GHz Total Memory:4096MB(DDR4)
Page 58
BATTLE-AX Z490M-PLUS V20 5-4-2 OverClock Settings(OC) ADVANCED LANGUAGE BIOS SETTING EXIT CPU OverClocking Frequency Temperature Configuration OverClocking Feature Disabled 2892.19MHZ +41℃ Memory Intel(R)Core(TM)i5-10400F CPU@2.90GHz Ext.Frequency Configuration Voltage BCLK Frequency 99.780MHZ 100.00MHZ 0.916V Over Voltage CPU Power Limit 65.0 Configuration Package Power Limit 134.0...
Page 59
BIOS Setting to the different workload of the system to reduce the power consumption and heat. When overclocking, this option needs to be set to "Disabled". Options: Disabled, Enabled. Turbo Mode Set Turbo Mode. Options:Disabled and Enabled. CPU power limit Set CPU power limit.
Page 60
BATTLE-AX Z490M-PLUS V20 CAS Latency Time (tCL) This controls the latency of the C A S, which determines the delay time (in the time cycle) when the SDRAM starts reading after the receive command. RAS/ CAS Delay (tRCD) This project is used to select the time lag between RAS (Row Address Strobe) and CAS (Column Address Strobe) when reading and writing data at the same bank.
Page 61
BIOS Setting be set to two clock cycles, which is the best setting when data expansion can be ignored. Write to Read Delay (tWTR) TWTR means "read to write delay". It sets the clock cycle that must wait between the last valid write operation and the next read operation in the same cell in the DDR memory module.
Page 62
BATTLE-AX Z490M-PLUS V20 5-4-3-1 Advanced Advanced BIOS Features Onboard Devices Onboard LAN Controller Select to open or close the onboard network card controller. Options: Disabled and Enabled. PXE Boot ROM Select to open or close PXE Boot ROM. Options: Disabled,UEFI and Legacy.
Page 63
BIOS Setting USB KB/MS Wakeup Function Set up USB Keyboard/Mouse wake-up. Options: Disabled, Enabled. Wake By Lan Set up network wake-up. Options: Disabled, Enabled. Power On By PS/2 Keyboard Set the PS/2 keyboard to boot. Options: Disabled, AnyKey (any key), Password (password).
Page 64
BATTLE-AX Z490M-PLUS V20 CPU Configuration Intel VMX Virtualization Technology Set to open or close the Intel virtualization technology. Intel virtualization technology allows you to separate partitions of data on the same platform, performing multiple operating systems and applications.Options:DisabledㄋEnabled. Active Processor Cores Set the number of activation processor cores.
Page 65
BIOS Setting XHCI Hand-off This project is used to start an operating system that supports no "XHCI hand-off" functionality. Options: Disabled, Enabled. USB Mass Storage Driver Support Set USB to support large capacity memory. Options: Disabled, Enabled. Port 60/64 Emulation USB port 60/64 simulation settings.
Page 66
BATTLE-AX Z490M-PLUS V20 NVME Configuration Display the connection of NVME configuration. 5-4-3-2 Chipset System Agent Configuration (North Bridge configuration) IGD Memory Set the capacity of shared memory for integrated graphics cards. DVMT/FIXED Memory Set the total capacity of shared memory for integrated graphics cards.
Page 67
BIOS Setting ME Configuration ME Control Set to open or close the ME firmware. Options:DisabledㄋEnabledㄌ ME FW Version Displays ME the FW version. 5-4-3-4 Boot Setup Prompt Timeout When setting up the screen, the screen prompts the waiting time (second), and the number of seconds is required.
Page 68
BATTLE-AX Z490M-PLUS V20 5-4-3-5 Password Setting Administrator Password This project is used to set the system administrator password. Please follow these steps: 1.Select"Administrator Password"and press the "Enter" button. 2. When"Greate New Password"appears enter the password you want to set, which can be in six bytes in English, numbers and symbols, and then press the "Enter"...
Page 69
BIOS Setting 5-4-4 BIOS setting upgrade BIOS Options include: upgrade BIOS from U disk, backup original BIOS to U disk, download and upgrade BIOS from network ADVANCED BIOS SETTING LANGUAGE EXIT BIOS Update EZ BIOS Flash Frequency Temperature 2892.19MHZ +41℃ Ext.Frequency Voltage 100.00MHZ...
Page 70
BATTLE-AX Z490M-PLUS V20 5-4-6 Exit exit Settings The exit options include restore default / save and restart / do not save and exit. BIOS SETTING LANGUAGE ADVANCED EXIT EXIT Options Temperature Frequency +41℃ 2892.19MHZ Voltage Ext.Frequency 100.00MHZ 0.916V Load Optimized Default...
Page 71
The material in this document is the intellectual property of Colorful Technology and Development CO, LTD. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
Page 72
Or our engineer, send the follow information to us! Customer name Purchase date Contacts Contact phone Contact address Product model Product SN Dealer name Dealer phone Dealer address Website: www.colorful.cn Service hotline: +86400-678-586...
Need help?
Do you have a question about the BATTLE-AX Z490M-PLUS V20 and is the answer not in the manual?
Questions and answers