Preparation for Tests
N9360A Multi UE Tester Quick Reference Guide
Figure 3-1 Typical Test Setup
Connecting RF Signal:
Connect the mobile phone to the Tester using the
1
user-supplied RF Cable, optional Antenna Coupler, or
optional Shield Case.
On the [Loss] screen obtained from the [Initial],
2
[Configuration] and [Configuration: Test Condition] screens,
set the "Loss" field to
values for each Radio System or Band in the "RF In" and "RF
Out" fields depending on the RF connection.
Connecting a Printer:
• Connect a printer to print a hardcopy of the test results if
required.
Inserting the TEST SIM for GSM mobile phone or TEST USIM for a
W-CDMA mobile phone:
• Insert the Test SIM (Subscriber Identity Module) supplied by
Agilent into the GSM mobile phone or the test USIM
(Universal Subscriber Identity Module) supplied by Agilent
into the W-CDMA mobile phone before performing any test.
• GSM/W-CDMA/cdma2000 Mobile Phone Repair Process
General Operation
and enter the appropriate loss
On
3
3-3