When "Cdma Mode" Is Set To 1Xev-Do Mode - Agilent Technologies N9360A Quick Reference Manual

cdma2000 System
6

When "CDMA Mode" is set to 1xEV-DO mode

6-6
For Go/No-Go Testing
Figure 6-4 [Auto Test (1xEV-DO): Stand-by] Screen
Press the Automatic Test softkey on the [Initial] screen in
1
cdma2000 system
Move the cursor to the "Procedure" field, and select a
2
pre-defined test procedure.
Press the Start softkey.
3
Turn the mobile phone on. Wait for the completion of UATI
4
Assinment.
Each test flow step is highlighted as it runs.
5
After completing the test, check the results on the screen.
6
To print the test results or to save them into a USB memory
7
device, press the More(1 of 2) softkey and then the Print Screen
softkey.
N9360A Multi UE Tester Quick Reference Guide