Agilent Technologies N9360A Quick Reference Manual page 39

N9360A Multi UE Tester Quick Reference Guide
For Troubleshooting
Figure 6-3 [Manual Test (MC-1x): Stand-by] Screen
Press the Manual Test softkey on the [Initial] screen.
1
Move the cursor to the "Procedure" field and select a
2
pre-defined test procedure.
Set the Service Option field to 32.
3
Turn the mobile phone on.
4
Wait for the completion of Location Update.
5
Press the BS Call softkey.
6
While "Connection" is highlighted in the test flow, press the
7
Trigger softkey to start single measurement or the Trigger
Sing/Cont softkey to start continuous measurement. Press the
Trigger Sing/Cont softkey again to terminate continuous
measurement.
Press the Release softkey to finish the test.
8
cdma2000 System
6
6-5