For Pinpointing Failures - Agilent Technologies N9360A Quick Reference Manual

For Pinpointing Failures

N9360A Multi UE Tester Quick Reference Guide
Table 4-2 GSM Automatic test sequence
Step Action needed
Location Update Wait until the Location Update is complete.
MS Call Dial an arbitrary number and press the Off Hook key
on the mobile phone.
Talk Talk to the mobile phone to judge its loop back sound
quality and press the Pass or Fail softkey.
RF Test Wait until the RF test is complete.
MS Release Finish the call from the mobile phone.
BS Call Respond to the call on the mobile phone.
BS Release Wait until the call is finished from the Tester.
Figure 4-2 [Automatic Test: Stand-by] Screen
Perform the steps described in "For Go/No-Go Testing."
1
Press the Screen>> softkey to set screen mode to Detail or
2
Value.
GSM System
4
4-3