Troubleshooting - Wilfa MIST Operating Instructions Manual

Troubleshooting

If the machine is not working properly, please try the following:
Problem Possible reasons
Check plug
Check power switch
No steam
No water in tank
Too little water in tank
New machine
Peculiar smell steam
Too dirty water, Or water in
tank for too long
Tank in incorrect position
Noise Less water in tank
Uneven level for machine
Steam out from outlet Clearance between steam
surrounding outlet and water tank
No water in water sink caused
by broken water level sensor
High Temp. warning
High water level in the water
sink caused by wrong way of
adding water
Solutions
Plug into socket
Turn on power switch
Add water
Add water until enough
Take off tank cover, place the water
tank in cool and dry place for 12 hours
Clean the water tank,
Replace with clean water
Put the tank in correct position
Add water
Place it on even lat or ground
Sink the steam outlet cap in water and
use it again
Contact the store where the product
was purchased
Pour out all the water in the water sink
and reset the water tank
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
AS WILFA
Industriveien 25
1481 Hagan
Norway
wilfa.com