Hyundai HiE-S UF Series Installation Manual page 12

Two people stand on the frame surface of
the module to hold the component, while
the other person cuts the lower two
transverse plastic steel packing belts
Unpacking method 2: Rely on
Unpacking the reclining surface needs to
be close to a solid wall or another pallet of
intact components of the same size
Two people stand on the frame surface of
the module to hold the module, while the
other person cuts the lower two transverse
plastic steel packing belts
Gently push the assembly so that it leans
against the support frame and remove the
vertical steel strip
Remove the plastic wrap and wrapping film
for the modules to be removed, and
remove the cover and packing case
Gently push the module so that it leans
against the support, removing the vertical
strip of plastic steel
Remove all modules in sequence to
complete module unpacking
Use scissors to remove the three
transverse steel strips from the upper
part of the assembly
Remove all modules in sequence to
complete module unpacking