Toshiba TEC B-SP2D Series Manual page 7

(4) Starting the Parameter Setting Mode
.irst, confirm that “IrDA: TEC Protocol” is selected for the Control of the Com Settings, and the
IrDA port to which the ACT-IR220Lplus is connected is selected for the PORT.
Then, face the ACT-IR220Lplus toward the IrDA interface window of the printer, and click on the
Start button to cause the printer to enter the download mode.
When the downloading succeeds, the status indicator on the printer will blink in green.
The B-SP2D R.-LAN Configuration screen will be shown with the Start button and the Com
Settings grayed out.
- 5 -