Advertisement
4. SO.TWARE INSTALLATION
[SETUP DISK]
The setup disk of the B-SP2D R.LAN Configuration Tool consists of 3 floppy disks.
[Installation Procedure]
1. Start Windows 95, Windows 98, Windows 2000, or Windows XP, and insert Setup Disk (1/3) into the
PC floppy drive.
2. Click on the START button then highlight RUN and click on RUN.
3. When the RUN display appears, type in A:\SETUP.EXE, and click on the OK button.
4. Install the R.LAN Configuration Tool by following the messages displayed on the screen.
5. After the R.LAN Configuration Tool has been installed, the completion screen will automatically
appear. This is the end of the R.LAN Configuration Tool installation.
B-SP2D R.LAN
Configuration Tool
WR..D-SP2D-R.LAN-PARATOOL
7.M00557000
31st October 2003
V001.000
Copyright © 2003
TOSHIBA TEC CORPORATION
All Rights Reserved
- 2 -
DISK(1/3)
Advertisement
