Settings
You can preview the screensaver by pressing yellow . To re-display the menu screen, press
any button .
Press blue to apply changes, or press BACK to cancel and return to the previous menu .
Managing favourite channels
The Manage Favourite screen allows you to choose up to 100 favourite channels from the
full list .
Use U or D to highlight a channel you want as a favourite, then press OK . The channel's
state changes accordingly .
Note
To view the previous or next group of channels, press CH + or CH – .
To sort the channel list, press yellow, highlight the category of channels you want to see
(All channels, Entertainment, Movies, Music, News, Sports) using U or D then press OK .
After you have chosen and saved some favourite channels, you can reorder them by first
pressing the green button . Highlight the channel you want to move then press OK . Use
U or D to choose a new position, and press OK again . The list updates .
Press blue to apply changes (you may also have to confirm the changes by pressing OK) .
If you press red after making changes, a pop-up message asks if you want to save . Highlight
Yes or No and press OK .
❖ System Setup
You use the System Setup menu to:
change your box's installation settings
◆
change the TV settings
◆
choose your preferred audio output format, and adjust the audio delay setting
◆
reset your box to the factory default settings
◆
Changing installation settings
Default Transponder
Default values are already entered on this screen; under normal circumstances you do not
need to change these . If you change your satellite dish installation, you may need to change
the values so that your box can tune to all the satellites available .
Use the number buttons to enter the frequency (GHz) and Symbol Rate
◆
(ksymbol/s)
Select the polarization (Horizontal or Vertical)
◆
Select the FEC (1/2, 2/3, 3/4, 5/6 or 7/8)
◆
Press blue to apply changes, or press red to cancel and return to the previous menu .
34
Using your ViasatHD box