Satellite Dish - Arris DZS3000NV User Manual

Satellite dish

You need a correctly-installed satellite dish, pointing at the correct satellite(s) .
If you have a satellite dish but it is not pointing at the correct satellite(s), you
◆
need to make adjustments . Please see the information supplied with your dish/
LNB for details on how to do this, or seek professional advice .
If you do not have a satellite dish installed, please ask your dealer to recommend
◆
a local dish-installation engineer .
Single LNB (SatCR or Universal)
If you have one LNB only, to ensure the simplest installation method, and for the best
Viasat channel line-up, you should use the 'Astra 4A' satellite, at 5° East .
Multiple LNBs (Universal only)
If you are using a DiSEqC™ unit* with 2 LNBs/satellite dishes, to ensure a simpler
installation, and for the best Viasat channel line-up, you should connect up the LNBs to the
DiSEqC™ ports as shown in the LNB positions table below .
You must then connect your DiSEqC™ unit to the satellite input on your set-top box (see
also pages 12 and 13) .
LNB positions table
Satellite
Thor
Astra 4A
If you change your satellite dish installation, you may need to change your settings so that
your box can tune to all the satellites available - See "Changing installation settings" on
page 35 .
*DiSEqC™ is a trademark of Eutelsat.
Position Recommended DiSEqC™ port (for
multiple LNB set-ups)
1° West 1
5° East 2
Installation
11