Fcc Classa Compliance; Modifications - ADC PG-Flex FLC-706 1A Technical Practice

Table of Contents

FCC Class A Compliance

FCC C

A C

LASS

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the use will be required to correct the interference at his own expense.

The FCC requires the user to be notified that any changes or modifications made to this device that are not

expressly approved by ADC Technologies, Inc. voids the user's warranty.

All wiring external to the product(s) should follow the provisions of the current edition of the National Electrical

Code.

OMPLIANCE

January 6, 2003

SCP-FLC706-011-03H

FLC-706 List 1A

Table of Contents