Besam SW200i Owner's Manual page 8

The best way to remove dust and dirt from the SW200i is to use water and a soft cloth or a sponge. A gentle de-
tergent may be used. To maintain the quality of the enamel layer, the surfaces should be cleaned once/four months
period. The cleaning should be documented. To avoid damages to the profiles the brushes/weather stripping must
be vacuum-cleaned weekly.
Do not expose windows, doors or profiles to alkalis. Both aluminium and glass are sensitive to alkalis.
Do not clean with high pressure water. Operator, programme selector and sensor may be damaged and water
may enter the profiles.
Do not use polishing detergent.
Do not scrub with materials like Scotch-brite, as this will cause mechanical damage.
8
FUNCTION AND VISUAL INSPECTION
CLEANING
Issue 2012-03-20 1007717-US-1.0