Table of Contents
Advertisement
General accessories
Your SW200i can be further improved with the following add-ons (please contact your local
Besam company for detailed description).
Position switch
Electrical lock
9
Key switch
, see page 8
10
Elbow switch
10
Radar
, see page 8
11
Wireless transmitters (not illustrated)
Access control (not illustrated)
Door stop (not illustrated)
Safety accessories
Even though the SW200i is installed to comply with all applicable safety regulations, it is
possible to enhance safety/comfort with the following add-ons (please contact your local Besam
company for detailed description).
Safety sensors
12
Finger protection
Troubleshooting
What's wrong?
The door does not open
The motor does not start
The motor starts but
door(s) will not open
The door does not close
The door opens and closes
continuously
If the problem continues, please contact your Besam representative.
1007717-US-1.0
, see page 8
3
, see page 8
, see page 8
, see page 8
, see page 8
8
Remedies
Change the setting of the program selector (see page 6).
Check that there are no objects in the detection zone if a sensor
is fitted.
Check the mains switch and fuse in the building.
Unlock the mechanical locks.
Check that nothing is jammed beneath the door.
Change the setting of the program selector (see page 6).
Check that there are no objects in the detection zone if a safety
sensor is fitted.
Check that nothing is jammed beneath the door.
Check that there are no moving objects within 39"-59" (1-1.5 m)
from the door if an automatic activation unit is fitted.
Issue 2012-03-20
11
Advertisement
Table of Contents
