Raisecom
RC1201-2GE16E1T1 Product Description
6.3.1 Preparing tools
Table 6-2 lists tools to be prepared for installation.
Table 6-2 Tools to be prepared for installation
Tape measure:
used to measure
the length
Slotted point
screwdriver:
used to tighten
slotted screws
Cold
compression
pliers: used to
crimping old-
press terminal
matched with
small section
power cable.
Vice crimper:
used to crimping
the connector of
telephone line
and cable crystal
head
Crimping pliers:
used to crimping
metal sheath in
the end when
processing the
coaxial cable
Solid wrench:
used to tighten
bolts and nuts in
narrow working
space
Name
Raisecom Technology Co., Ltd.
Picture
Level
instrument: used
to check the
levelness of the
equipment
installation
Cross
screwdriver:
used to tighten
cross screws
Diagonal pliers:
used to cut
insulated casing
Wire stripper:
used to divest
insulating layer
for small section
communication
cable
Adjustable
spanner: used to
wrench a certain
size hex head or
square head bolts
and nuts
Hex wrench:
used to tighten
bolts and nuts. It
can be with the
ball head or not.
Name
Picture
6 Installation
62