F5 Rs-232 Output Setting (Option) - Excell X Series User Manual

EXCELL PRECISION CO., LTD.

3-2 F5 RS-232 Output Setting (Option)

 Make J1、J3 on RS232 short circuit, when connecting to computer.
Use
Press key
Press key
Press key
r n P 0  RS232 command mode.
r n P 1  Stable transmission.
r n P 2  Continuous transmission.
r n P 3  Press
r n P 4  Press
r n P 5  Stable transmission in totalizing mode. Same format as (r n P 3).
r n P 6  Press
r n P 7  Press
r n P 8  Press
r n P 11  Print after removing goods (5% mode).
r n P 12  Print after removing goods (OK mode).
r n P 13  Continuous transmission, bluetooth format.
r n P 14  Stable transmission, only weight value is transmitted
RS-232 Interface Format
I . Mode: UART Signal of EIA-RS0232 C
II . Format :
Start bit
02036XXX
or key to select F5.
key to transmit simple format.
key to transmit complete format.
key to transmit simple free format. Please refer to F14.
key to transmit complete Free format. Please refer to F14.
key to transmit same format as (r n P 1) and (r n P 2).
1. Baud rate : 1 200, 2 400, 4 800, 9 600
2. Data bits : 8 bits
3. Parity bit : None
4. Stop bits : 1 bit
5. Code : ASCII (Exchange code of American standard)
Transmission mode
r n P 14 and press
RS-232 baud rate ：
press to save
Data bits
13
：use
key to select r n P 0 ~
to save
use key to select 1200~9600 and
bits/second
Stop bit
ZSME300000422