Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Top
1 pc.
B.
Side Frame
1 pc.
D.
Front Frame
1 pc.
Hardware List
Hex Wrench
Cam Lock Screw
1 pc.
8 pcs. (+1 extra)
Small Hex Wrench
Cam Lock
1 pc.
8 pcs. (+4 extra)
Tool(s) required for assembly: Phillips screwdriver, Level
home
5180-15
Executive Desk
C.
Side Frame
1 pc.
E.
Front Frame
1 pc.
M3x32
Wood Screw (long)
6 pcs. (+1 extra)
M3x16
Wood Screw (short)
8 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,
servicedesk@homestylesfurniture.com,
H.
Divider
1 pc.
L.
Keyboard
1 pc.
M3x25
M6x32
Wood Screw
Head Cap Bolt
16 pcs. (+1 extra)
21 pcs. (+1 extra)
M3x10
Wood Screw for Hinge
Flat Washer
6 pcs. (+1 extra)
21 pcs. (+1 extra)
888-680-7460
F.
Front Rail
1 pc.
G.
Back Panel
1 pc.
I.
Divider
1 pc.
J.
Stretcher
1 pc.
K.
Keyboard
1 pc.
M.
Drawer
2 pcs.
Refer to later page(s) of these
instructions for drawer assembly.
Spring Washer
21 pcs. (+1 extra)
M4x38
Machine Screw
Knob
4 pcs.
4 pcs.
Advertisement
Related Manuals for Homestyles 5180-15
Summary of Contents for Homestyles 5180-15
- Page 1 5180-15 Executive Desk IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed.
- Page 2 Assembly Instructions 2/6 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ The unit must be level to work properly. Use the included adjustable levelers to level. Ÿ...
- Page 3 Assembly Instructions / 3 6 Cam Lock Figure 3 STEP 3 Attach Dividers (H) and (I) to unit with Cam Locks. (See Figure 3) Attach Back Panel (G) to unit with Cam Locks. Wood Screw (long) Figure 5 Flat Washer Spring Washer Head Cap Bolt STEP 4...
- Page 4 Assembly Instructions / 4 6 Head Cap Bolt Spring Washer Flat Washer STEP 5 Place Top (A) upside down on a soft cloth. Attach unit to Top (A) with Flat Washers, Spring Washers and Head Cap Bolts. Head Cap Bolt Spring Washer Flat Washer STEP 6...
- Page 5 Assembly Instructions / 5 6 Drawer (M) Bottom STEP 7 Attach Drawer Front (M1) and Drawer Back (M2) to Drawer Side (M3) with Wood Screws. Wood Screw Roller at back Attach Drawer Side (M4) to unit with Wood Screws. Wood Screw (short) STEP 8 Slide Drawer Bottom (M5) into groove.
- Page 6 Assembly Instructions / 6 6 STEP 10 Attach Keyboard (L) to Keyboard (K) Wood Screw for Hinge with Wood Screws for Hinge. Attach Knobs to keyboard with Machine Screws. (See Figure 6) Machine Screw Knob Figure 6 Keyboard STEP 11 Turn unit over to its upright position.
- Page 7 CARE INSTRUCTIONS NEVER NEVER use glass cleaners on allow liquids to remain on furniture. finished furniture. Ammonia Absorption causes parts to warp chemically attacks the finish. and split and finishes to delaminate. Do not use power tools Do not place Do not write above 8 volts to assemble.
Need help?
Do you have a question about the 5180-15 and is the answer not in the manual?
Questions and answers