Page 1
5523-682 Corner Cabinet IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed.
Page 2
Assembly Instructions 2/7 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly.
Page 3
Assembly Instructions 3/7 Figure 3 STEP 2 Attach Side Panel (C) to Side Panel (D) with 2 pcs. of . (See Figure 3) Attach Side Panel (E) to Side Panel (D) with 2 pcs. of STEP 3 Attach side unit (C, D) and side unit (E, D) from Step 2 to Base (G) with 6 pcs.
Page 4
Assembly Instructions 4/7 STEP 4 Insert 8 pcs. of into side panels at desired level. (See Figure 4) Place Shelves (H) into position. Attach Doors (I) and (J) to unit by sliding door hinges into side panel hinges. (See Figure 5) Attach 2 pcs.
Page 5
Assembly Instructions 5/7 STEP 6 Attach Side Panel (K) to Side Panel (L) with 3 pcs. of Attach Side Panel (M) to Side Panel (N) with 3 pcs. of STEP 7 Attach side unit (K, L) and side unit (M, N) from Step 6 to unit from Step 5 with 6 pcs.
Page 6
Assembly Instructions 6/7 STEP 8 8 pcs. of 05 Insert into side panels at desired level. Place Shelves (H) into position. Attach Doors (P) and (Q) to unit by sliding door hinges into side panel hinges. 2 pcs. of 07 Attach to Doors (P) and (Q) 2 pcs.
Assembly Instructions 7/7 IMPORTANT To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. STEP 10 Anchor in wall Wall Screw Pre-drilled hole Bracket on wall at top of unit Place unit at desired location.
Wood Screw Machine Screw 4 pcs. 42 pcs. (+2 extra) 42 pcs. (+6 extra) 4 pcs. 8 pcs. (+1 extra) 16 pcs. (+1 extra) 4 pcs. For assembly see instructions in carton 5523-682. home styles Customer Service: www.homestylesfurniture.com, servicedesk@homestylesfurniture.com, 888-680-7460...
Page 9
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on allow liquids to remain on furniture. finished furniture. Ammonia Absorption causes parts to warp chemically attacks the finish. and split and finishes to delaminate. Do not use power tools Do not place Do not write above 8 volts to assemble.
Need help?
Do you have a question about the 5523-682 and is the answer not in the manual?
Questions and answers