BenQ RP6503 User Manual page 19

14
Parts of the display and their functions
Using the BenQ Interactive Flat Panel by remote control
Insert the remote control USB receiver into the USB ports at the bottom right corner of
the back of the display.
For detailed function of each button, see
The remote control and the USB receiver have been paired by default.
• This remote control applies only to a specific model and operating systems. Contact your reseller
if you have any question.
Pairing remote control and the USB receiver
If you are experiencing issues using the function key on the remote control, please follow
the steps and pair again the remote control to resolve the issue:
1. Insert the USB receiver to Interactive Flat Panel's USB port and place the remote
control near it.
2. Press the and
3. The pairing is completed once the indicator stops flashing.
at the same time, and the indicator light will start flashing.
BLANK
Remote control on
Wi-Fi Adapter
Remote control
USB receiver
12.