JVC CA-MXS6MDR Instructions Manual page 64

The following functions are selected and operated through
the menu screens.
• Menus you can see on the screen vary according to the
operating condition of the unit.
Ex. This menu appears when the source is CD
(with the unit turned on, but not playing)
• Clock Setting — CLOCK SET (see page 54)
Appears only when the clock has not been set.
Once it has been adjusted, it appears in the timer
setting mode.
• Timer Setting (see pages 54 – 58)
Recording Timer Setup
— REC SET UP (see page 54)
Recording Timer On/Off Setting
— REC ON/OFF (see page 56)
Daily Timer Setup
— DAILY SET UP (see page 56)
Daily Timer On/Off Setting
— DAILY ON/OFF (see page 58)
Clock Readjustment Setting
— CLOCK SET (see page 54)
• Sound Setting
Sound Mode Setting — SOUND
Appears only when the unit is turned on.
Active Bass Extension On/Off — A. BASS
Appears only when the unit is turned on.
• FM Reception Mode Setting — FM MODE
Appears only when the unit is turned on, and the
source is FM.
• CD and MD Playback Mode Setting
CD playback mode setting — CD
Appears only when the unit is turned on, and the
source is CD, but not playing.
CD repeat mode setting — CD REPEAT
Appears only when the unit is turned on, and the
source is CD.
MD playback mode setting — MD
Appears only when the unit is turned on, and the
source is MD, but not playing.
MD repeat mode setting — MD REPEAT
Appears only when the unit is turned on, and the
source is MD.
• Display Setting
Level Meter Selection — LEVEL METER
Display Color Selection — COLOR
Display Pattern Selection — DISP
Contrast Adjustment — CONTRAST ADJ.
Appears only when the unit is turned on.
Startup Display Setting
— Startup Disp. (see page 52)
Appears only when the unit is turned off.
• External Source Setting
Input Level Adjustment — INPUT Level
Appears only when the unit is turned on, and the
external equipment connected to the LINE 1
jacks or to the LINE 2 jack is selected as the
source.
Source Name Change — NAME CHANGE
Appears only when the unit is turned on, and the
external equipment is selected as the source.
• Auto-Power Off Setting — A. P. off
Appears only when the unit is turned on.
– 61 –