Table of Contents
Advertisement
On the unit ONLY:
1
Press MENU.
Ex. When the unit is turned on, and the source
is CD (but not playing)
2
Push the joy control downward ( ) to select "REC
ON/OFF" (highlighted).
• If you cannot select "REC ON/OFF," you have not
finished setting the built-in clock. (See page 54.)
3
Call up the Recording Timer Setup screen.
1) Push the joy control rightward ( ) or leftward
( ) to select "REC SET UP."
• The items on the menu change as follows:
REC ON/OFF
CLOCK SET
DAILY SET UP
2) Press SET.
The timer (
) and REC indicators start flashing
on the display.
4
Push the joy control rightward ( ) or leftward ( )
to set the hour of the timer-on time, then press SET.
REC SET UP
DAILY ON/OFF
– 55 –
5
Push the joy control rightward ( ) or leftward ( )
to set the minute of the timer-on time, then press
SET.
6
Push the joy control rightward ( ) or leftward ( )
to set the hour of the timer-off time, then press SET.
7
Push the joy control rightward ( ) or leftward ( )
to set the minute of the timer-off time, then press
SET.
8
Push the joy control rightward ( ) or leftward ( )
to select the source.
• The source changes as follows:
FM – –
DIGITAL IN
FM – –:
Tunes into an FM station.
= Select a preset station (see below).
AM – –:
Tunes into an AM (MW/LW) station.
= Select a preset station (see below).
LINE1*:
Selects the external equipment
connected to the LINE 1 jacks.
LINE2*:
Selects the external equipment
connected to the LINE 2 jack.
DIGITAL IN*: Selects the external equipment
connected to the DIGITAL IN
terminal.
* To operate these equipment with the Recording
Timer, they also need to have the timer function.
If you have changed the source name, the changed
name will appear.
9
If you have selected "FM – –" or "AM – –" as the
source in the above step, select a preset number.
Push the joy control downward ( ) or upward ( ) to
select a preset station, then press SET.
• If you press SET without selecting a preset station,
the last received station will be tuned in when the
timer recording starts.
If you have selected one of the external equipment
as the source in the above step, simply press SET.
AM – –
LINE1
LINE2
Hide quick links:
Advertisement
Table of Contents
