Table of Contents
Advertisement
4
Press PTY SEARCH again.
While searching, the selected PTY code appears and
"SEARCH" flashes in the main display.
The unit searches 30 preset FM stations, stops when it
finds the one you have selected, and tunes in that
station.
To continue searching after the first stop:
Press PTY SEARCH again while the indications in the main
display are flashing.
If no program is found, "NOT FOUND" appears in the main
display and the unit returns to the last received station.
To stop searching any time during the process:
Press PTY SEARCH while searching.
Switching to a Program Type of Your Choice
Temporarily
The EON function allows the unit to switch temporarily to a
broadcast program of your choice (TA, News, and/or Info)
from a different station except when you are listening to a
non-RDS station — some FM stations and AM (MW/LW)
stations.
• The EON indicator lights while receiving a station with
the EON code.
• EON function is applicable only to preset stations.
To activate the EON function, use the remote control:
1
Press RDS CONTROL while listening to an FM
station.
2
Press EON.
"EON ON" appears in the main display, and the last
EON data type selected — TA/News/Info — lights on
the display.
3
Press TA/News/Info repeatedly until the EON data
type you want is selected (highlighted).
• Each time you press the button, the EON data types
change as follows:
TA = News = Info = TA/News = News /Info =
TA/Info = TA/News/Info = (back to the beginning)
TA:
Traffic announcement
News:
News
Info:
Programs the purpose of which is to impart
advice in the widest sense.
To cancel the EON function, press EON again so that the
TA/News/Info indicator goes off. "EON OFF" also appears
in the main display for a while.
• If you cancel the EON function while receiving a
program selected by the EON function, the unit goes
back to the previously tuned station.
– 19 –
Hide quick links:
Advertisement
Table of Contents
