First Track Recording - JVC CA-MXS6MDR Instructions Manual

2
Prepare a CD.
• Place a CD on one of the disc tray (CD 1, CD 2, or
CD 3), press CD # / 8, then 7 before going to the
next step.
3
Press DISC to select the disc you want to record.
• Make sure that the correct disc number indicator is
selected on the display.
4
Press LONG MODE on the unit if necessary.
The recording length mode changes as follows:
SP
(Standard Play)
(4 Times Long Play)
• For the recording length mode, see "Stereo Long-
Hour Recording (MDLP)" on page 35.
5
Select the recording mode.
1) Press REC MODE.
2) Push the joy control downward ( ) to select
"1CD=MD."
3) Push the joy control rightward ( ) or leftward
( ) if you want to change the recording speed
from normal speed to high speed (HIGH).
4) Press SET.
The REC PAUSE lamp on the unit lights, and
recording starts.
EX. When high speed recording is selected
When the entire CD is recorded, recording will stop.
Both the CD player and the MD recorder stop
automatically.
To stop recording, press 7. "WRITING" flashes for a
while.
Both the CD player and the MD recorder stop.
During One CD Synchronized Recording
Repeat play mode will be canceled automatically.
LP2
(2 Times Long Play)
LP4

First Track Recording

First Track Recording allows you to record the first track of
each loaded CD. You can, for example, make a directory of
all your best CDs.
7Using the REC MODE button on the unit ONLY
1
Insert a recordable MD into the MD loading slot.
2
Prepare CDs.
• After placing CDs, press CD # / 8, then 7 before
going to the next step.
• Always place a CD on the CD 1 tray. If not, this
function does not work.
3
Press LONG MODE on the unit if necessary.
The recording length mode changes as follows:
SP
(Standard Play)
• For the recording length mode, see "Stereo Long-
Hour Recording (MDLP)" on page 35.
4
Select the recording mode.
1) Press REC MODE.
2) Push the joy control downward ( ) to select
"1st TRK."
3) Push the joy control rightward ( ) or leftward
( ) if you want to change the recording speed
from normal speed to high speed (HIGH).
4) Press SET.
The REC PAUSE lamp on the unit lights, and
recording starts.
When the first track of the CD on the CD 1 tray is
recorded, the first track of the CD on the CD 2 tray
will be recorded. Recording continues until the first
track of each loaded CD is recorded.
– 39 –
LP2
(2 Times Long Play)
LP4
(4 Times Long Play)