References - Gnss Window - Microsemi SyncServer S600 User Manual

Chapter 4
Navigation Windows
References - Reference GNSS Window
Use this window to configure GNSS position and operating mode. See
Note: For accurate timing, it is important to accurately enter the delay
of the antenna and cable. If the system has already locked to a
reference, then it is recommended that the user restart the
SyncServer after changing the cable delay. Otherwise, it may take an
extended period of time before the change is fully incorporated.
Figure 4-26. References - GNSS Window
90 SyncServer 600 Series User's Guide
Figure
098-00720-000 Revision B – April, 2016
4-26.