Preventive Maintenance - Microsemi SyncServer S600 User Manual

Chapter 7 Maintenance, Troubleshooting & Part Numbers

Preventive Maintenance

Preventive Maintenance
The SyncServer S6x0 requires minimal preventive maintenance. Ensure the unit is
not exposed to hazards such as direct sunlight, open windows, water, or extreme
heat. See Environmental
compatibility conditions that may cause damage.
Caution: To avoid electromagnetic discharge damage to the circuitry,
never attempt to vacuum the SyncServer S6x0.
Table 7-1 lists preventive maintenance measures to be performed periodically. Do
not disassemble components just for the purpose of inspection.
Table 7-1. Preventive Maintenance
Item
Chassis Inspect for dirt or foreign
material
Cables Inspect for pinched, worn or
damaged cable
Connectors Inspect for loose or damaged
connector
Safety Considerations
Follow your company's safety guidelines and policies when working on or around
live equipment.
ESD Considerations
Maintenance personnel should wear ESD wrist straps when installing or working on
all SyncServer S6x0 equipment. Plug the user-supplied wrist strap into the
SyncServer S6x0.
166 SyncServer 600 Series User's Guide
Requirements, on page 38, for electromagnetic
Inspection
Clean the exterior of chassis with
a soft dry cloth
Replace pinched, worn or
damaged cable at the first
opportunity
Tighten loose connectors. If
damaged, replace the connector
and/or cable at the first opportunity
Corrective Action
098-00720-000 Revision B – April, 2016
Interval
Periodically
Periodically
Periodically