Microsemi SyncServer S600 User Manual page 162

Chapter 6 Provisioning
Provisioning for SNMP
Restoring Provisioning Data
Table 6-18. Backing Up Provisioning Data
Method
Web Interface
CLI
Front Panel
Provisioning for SNMP
The Simple Network Management Protocol (SNMP) is an application layer protocol
that allows you to manage network devices. SNMP is based on a client-server
query-response mode that requires an Ethernet connection. A manager application
(software installed on a computer) is the client generating the queries, and an agent
(software on the SyncServer S6x0) is the server generating responses. The
SyncServer S6x0 SNMP supports traps and the MIB-II system MIB.
SyncServer S6x0 supports SNMPv2c and SNMPv3. SNMPv3 provides additional
security features not available in SNMPv2c. In addition to the functions of
SNMPv2c, SNMPv3 allows user and trapuser levels that are based on
authentication and privacy settings. The authentication algorithm is either
HMAC-SHA-1-96 or MD5, with a 20-character key. The privacy settings are based
on the AES128 encryption standard.
Port 161 is the port of standard SNMP interactive communications and port 162 is
the trap port.
SNMP functionality is provisioned on the SyncServer S6x0 using the web interface.
Each alarm trap OID from the SyncServer S6x0 represents a unique alarm.
160 SyncServer 600 Series User's Guide
Steps
Admin > Config Backup/Restore/Reset
1. Enter a password for Backup and
Restore.
1. Use the radio button to select
"Restore".
2. Navigate to the location of the backup
file and select it.
3. Click the Apply button.
n/a
n/a
Notes
098-00720-000 Revision B – April, 2016