Ewf (Enhanced Write Filter) Set - M2I TOP-PCVIEW Series Hardware Manual

TOP-PCVIEW Hardware Manual

8.3. EWF (Enhanced Write Filter) Set

(*Only support WES7 O/S.)
EWF is to prevent a direct write to the disk, a technology that allows you to give the OS partition and the protection of unit.
When using the EWF, all write operations are being written in physical memory, when the reboot is initialized, and it will
save to disk when needed. The physical memory is called an overlay the information related to the write operation on the
overlay will be accumulated. The Product can be set easily by built-in applications.
"Enable": EWF is active by using the write protection on the disc.
"commit": information is stored in a temporary space on the active state of EWF (write operation) to the storage on the disk.
"Disable": deactivate the EWF creates the disk as normal.
"Activate HORM": all disks are available from the state and the EWF is enabled, the system shut down like hibernation.
Decorate it to the boot prompt.
1. When you run the EWFManager of the Start menu as shown below will run the program.
2. The default status of EWFManager is set to DISABLED.
3. Set to ENABLED.
4. reboot will be ENABLED state.
23 / 33
M I Corporation
2
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: +82-70-465-3366, Fax: +82-31-465-3355, www.m2i.co.kr