Touch Panel Compensation - M2I TOP-PCVIEW Series Hardware Manual

8.2

Touch panel compensation

(1) Calibration settings are used when the user wants a touch panel coordinates and the coordinates do not match.
(2) It is also possible for users to interact with the touch at different points where desired.
(3) Calibration settings are as follows.
1. Run eGalaxTouch - Configure Utility
2. Run "tool" - "Linearization Calibration"
3. Click and hold the pointer is displayed correctly.
Do not correction from a sharp object.

improve accuracy when you hold down the exact location, such as a stylus pen.

M I Corporation
2
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: +82-70-465-3366, Fax: +82-31-465-3355, www.m2i.co.kr
Program.
TOP-PCVIEW Hardware Manual
22 / 33