Chapter 8. System Utilities; System Recovery Solution - M2I TOP-PCVIEW Series Hardware Manual

Chapter 8. System Utilities

8.1.

System Recovery Solution

User error or virus, warm a system file is corrupted, you can recover to the factory default state.
Although the recovery program is built into the body, it is recommended to produce a recovery USB memory stick.
(1) After the Post process (self-test) is finished, press F11 to run the recovery program.
(2) Available to the recovery of the factory default state following a recovery procedure.
(3) Factory reset recovery time is within 30 minutes.
(4) Please be careful when restoring all previously saved data will be deleted.
1. Select the Acronis True Image.
* At this time, do value using a mouse or touch screen, you should always select only the keyboard.
2. When the following screen appears, execute in the order specified.
1) Select backup archive: Press the right button on the image file list to select "Recover".
* If there is no recovery file on the right, select [Browse Backup]-> [Acronis Secure Zone]-> Restore File on the right side of
the screen.
2) [Recovery method]: Select "Recover whole disks and partitions"
M I Corporation
2
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: +82-70-465-3366, Fax: +82-31-465-3355, www.m2i.co.kr
TOP-PCVIEW Hardware Manual
20 / 33