Advertisement

Quick Links

2
EN
Dear Customer,
Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions
contained on this page to ensure safe use of your new VCR.
CAUTIONS
WARNING:
DANGEROUS VOLTAGE INSIDE
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
The POWER
button does not completely shut off mains
power from the unit, but switches operating current on and off.
" " shows electrical power standby and " " shows ON.
This unit is produced to comply with Standard IEC Publ. 65.
POWER SYSTEM:
This set operates on voltage of AC 110 – 220V`, 50/60 Hz
with automatic switching.
The rating plate and safety caution are on the rear of the
unit.
IMPORTANT:
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
CAUTION
When you are not using the VCR for a long period of
time, it is recommended that you disconnect the power
cord from the AC outlet.
Dangerous voltage inside. Refer internal servicing to
qualified service personnel. To prevent electric shock or fire
hazard, remove the power cord from the AC outlet prior to
connecting or disconnecting any signal lead or aerial.
Changes or modifications not approved by JVC could
void user's authority to operate the equipment.
N-PAL NTSC
Cassettes marked "VHS" (or "S-VHS") can be used with this
video cassette recorder. However, only "VHS" recordings can
be played back in this model.
HQ VHS is compatible with existing VHS equipment.
Warning on lithium battery
The battery used in this device may present a fire or
chemical burn hazard if mistreated. Do not recharge,
disassemble, heat above 100°C or incinerate.
Replace battery with Panasonic (Matsushita Electric),
Sanyo, Sony or Maxell CR2025; use of another battery may
present a risk of fire or explosion.
Dispose of used battery promptly.
Keep away from children.
Do not disassemble and do not dispose of in fire.
HOW TO USE THIS INSTRUCTION
MANUAL
● All major sections and subsections are listed in the Table
Of Contents on page 3. Use this when searching for
information on a specific procedure or feature.
● The Index on pages 34 – 36 lists frequently-used terms,
and the number of the first page on which they are used
or explained in the manual. This section also illustrates
the controls and connections on the front and rear panel,
the front display panel and the remote control.
● The
mark signals a reference to another page for
instructions or related information.
● Operation buttons necessary for the various procedures
are clearly indicated through the use of illustrations at
the beginning of each major section.
BEFORE YOU INSTALL YOUR NEW
VCR . . .
. . . please read thoroughly the cautions on this page.

Advertisement

Table of Contents
loading

Summary of Contents for JVC HR-J452EN

  • Page 1 Dear Customer, Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions contained on this page to ensure safe use of your new VCR. CAUTIONS Warning on lithium battery The battery used in this device may present a fire or chemical burn hazard if mistreated.
  • Page 2: Table Of Contents

    CONTENTS NSTALLING YOUR NEW VCR UESTIONS AND ANSWERS PLAYBACK ..........31 Basic Connections ........4 RECORDING ..........31 TIMER RECORDING ........31 NITIAL SETTINGS Plug & Play ..........6 ROUBLESHOOTING Language ............. 8 POWER ............32 Clock ............9 TAPE TRANSPORT ........32 Summer Time (Daylight saving time) ......
  • Page 3: Basic Connections

    INSTALLING YOUR NEW VCR Basic Connections ANT. IN (Antenna or Cable input) Antenna or Cable Connect the power plug to an Coaxial Cable AC outlet before installing the lithium battery. (See below) Flat Feeder AC Outlet Matching Transformer (not supplied) AC Power Cord ANT.
  • Page 4 NOTES: CHECK CONTENTS ● The VCR channel is the channel on the TV which will receive Make sure the package contains all of the accessories the audio and video signals from the VCR. The VCR’s CH3- listed in “SPECIFICATIONS” ( pg.
  • Page 5: Plug & Play

    INITIAL SETTINGS The Plug & Play function simplifies installation by guiding you Plug & Play through the procedures of setting the language, clock and tuner channels — simply follow the on-screen menus that appear when the POWER button is first pressed to power on the VCR after you connect the power plug to an AC outlet.
  • Page 6 START AUTO CHANNEL Press MENU. AUTO CHANNEL SET ● Receivable channels in your area are automati- SCANNING... cally assigned to the CH 5 ∞ buttons, and non- receivable channels are skipped. PRESS (MENU) TO END ● If the tuner channels have been set properly “SCAN COMPLETED”...
  • Page 7: Language

    INITIAL SETTINGS (cont.) This VCR offers you the choice to view on-screen messages in Language Spanish or English (not including messages superimposed on the TV picture). Select the desired language using this procedure. The default setting is “ESPAÑOL”. TURN ON THE VCR Turn on the TV and select the VCR channel 3 or 4 (or AV Press POWER.
  • Page 8: Clock

    TURN ON THE VCR Clock Press POWER. Turn on the TV and select the VCR channel 3 or 4 (or AV ACCESS MAIN MENU mode). SCREEN Press MENU. ACCESS INITIAL SET SCREEN On the Main Menu screen, MAIN MENU move the highlight bar (arrow) to “INITIAL SET”...
  • Page 9 INITIAL SETTINGS (cont.) SET DATE Press CH 5 ∞ or PUSH JOG % fi until the desired date appears, then press OK or PUSH JOG #. ● Press and hold CH 5 ∞ or PUSH JOG % fi to change the date by 15 days.
  • Page 10: Summer Time (Daylight Saving Time)

    Summer Time (Daylight saving time) Once you have set the clock, whenever your local time enters Summer Time or goes back to regular time, you can easily make the 1-hour time adjustment using this function. ACCESS MAIN MENU SCREEN Press MENU. ACCESS INITIAL SET SCREEN On the Main Menu screen, MAIN MENU...
  • Page 11: Tuner

    INITIAL SETTINGS (cont.) Set Receivable Channels Tuner TURN ON THE VCR Press POWER. Turn on the TV and select the VCR channel 3 or 4 (or AV mode). ACCESS MAIN MENU SCREEN Press MENU. ACCESS TUNER SET SCREEN Move the highlight bar MAIN MENU (arrow) to “TUNER SET”...
  • Page 12: Add Or Delete A Channel

    Add Or Delete A Channel ACCESS MAIN MENU SCREEN Press MENU. ACCESS TUNER SET SCREEN Move the highlight bar (arrow) to “TUNER SET” by pressing CH 5 ∞ or PUSH JOG % fi , then press OK or PUSH JOG #. ACCESS MANUAL CHANNEL SET SCREEN Move the highlight bar...
  • Page 13: Imple Playback And Recording

    SIMPLE PLAYBACK AND RECORDING LOAD A CASSETTE Simple Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Don’t apply too much Playback pressure when inserting.
  • Page 14: Simple Recording

    LOAD A CASSETTE Simple Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. Recording SELECT RECORDING CHANNEL Press CH 5 ∞ . Or press the appropriate NUMBER keys, Turn on the TV and select the VCR channel 3 or 4 (or AV then press ENTER.
  • Page 15: Features

    PLAYBACK AND RECORDING FEATURES Still Picture/Frame-By- Playback Frame Playback PAUSE DURING PLAYBACK Features Press PAUSE. If there is vertical jitter, use the CH 5 or ∞ button to correct the picture. ACTIVATE FRAME-BY- FRAME PLAYBACK Press PAUSE repeatedly to advance one frame at a time. Press PUSH JOG £...
  • Page 16: High-Speed Search

    Index Search Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function. START SEARCH While the tape is stopped, press PUSH JOG ™ or £.
  • Page 17: Repeat Playback

    PLAYBACK AND RECORDING FEATURES (cont.) Repeat Playback START REPEAT Press and hold PLAY (until “ ” blinks on the front display panel) during playback, then release. ● The entire tape is played back 50 times. STOP REPEAT To stop, press STOP or STOP/EJECT at any time. NOTE: Pressing PLAY, REW, FF, PAUSE or PUSH JOG ™...
  • Page 18: Superimpose

    Superimpose This function, switchable between ON and OFF, determines whether or not operational indicators will appear on screen. ACCESS MAIN MENU SCREEN Press MENU. ACCESS FUNCTION SET SCREEN Move the highlight bar (arrow) to “FUNCTION SET” by pressing CH 5 ∞ or PUSH JOG % fi, then press OK or PUSH JOG # .
  • Page 19: Picture System

    PLAYBACK AND RECORDING FEATURES (cont.) The B.E.S.T. (Biconditional Equalized Signal Tracking) checks B.E.S.T. the condition of the tape during recording and playback, and compensates for poor reproduction to provide the best quality recording and playback pictures. *The default setting is “ON”. Picture System Preparation TURN ON THE VCR...
  • Page 20: Playback

    Recording Perform steps 1 – 3 on page 15 (“Simple Recording”) before continuing. START RECORDING DURING B.E.S.T. Press and hold REC and press PLAY on the remote control, or press REC on the VCR’s front panel. ● The VCR takes about 7 seconds to assess the START quality of the tape in...
  • Page 21: Video System

    PLAYBACK AND RECORDING FEATURES (cont.) ACCESS MAIN MENU Video System SCREEN Press MENU. ACCESS FUNCTION SET SCREEN Move the highlight bar (arrow) to “FUNCTION SET” by pressing CH 5 ∞ or PUSH JOG % fi , then press OK or PUSH JOG #.
  • Page 22: Recording Features

    Record One Program While Recording Watching Another ENGAGE TV MODE Features During recording... ● Press TV/VCR. The VCR’s VCR indicator goes out. (If you are using the RF connection ( pg. 4) to view the output from your VCR, the TV broadcast being recorded disappears.) ●...
  • Page 23: Imer Recording

    TIMER RECORDING You can directly program the VCR’s timer to record up to 8 Express Timer shows, as far as a year in advance. Remember, the clock must be set before you can program the timer ( pg. 6 or 9). LOAD A CASSETTE Programming Make sure the record safety tab is intact.
  • Page 24 SET TAPE SPEED Press SP/LP (EP) to set the tape speed. RETURN TO NORMAL SCREEN Press PROG. or OK. “PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears. ENGAGE TIMER MODE NUMBER "9" SP/LP (EP) Press TIMER.
  • Page 25: Check, Cancel And Revise Programs

    TIMER RECORDING (cont.) Check, Cancel And Revise Programs DISENGAGE TIMER Press TIMER, then press POWER. ACCESS PROGRAM CHECK SCREEN Press PROG. CHECK. PR START STOP DATE 8:00 10:00 12 24/12 10:00 10:45 40 25/12 11:30 01:00 125 25/12 PRESS (CHECK) TO NEXT POWER ACCESS PROGRAM SCREEN...
  • Page 26: Auto Sp→Lp Timer

    Auto SP → LP Timer Auto Timer If there is not enough tape to record the entire program in SP When the Auto Timer is set to ON the timer is automatically mode, the VCR automatically switches to LP (with PAL-N) or EP engaged when the VCR’s power is turned off.
  • Page 27: Instant Timer Recording (Itr)

    TIMER RECORDING (cont.) This easy method lets you record from 30 minutes to 6 hours Instant Timer (selectable in 30-min. increments) and shuts the VCR off after recording is finished. START RECORDING Recording Press REC on the front panel. (ITR) ENGAGE ITR MODE Press REC again.
  • Page 28: Diting

    EDITING You can use your VCR as the player and another VCR as the recorder. Edit To MAKE CONNECTIONS Another VCR Connect an Audio/Video cable between your VCR’s VIDEO OUT and AUDIO OUT connectors and another VCR’s VIDEO IN and AUDIO IN connectors. ●...
  • Page 29: Edit From A Camcorder Or Another Vcr

    EDITING (cont.) You can use a camcorder or another VCR as the player and your VCR as the recorder. Edit From A MAKE CONNECTIONS Camcorder Or Connect an Audio/Video cable between the camcorder’s or the playback VCR’s VIDEO OUT and AUDIO OUT connectors and your VCR’s VIDEO IN and AUDIO IN connectors.
  • Page 30: Playback

    QUESTIONS AND ANSWERS PLAYBACK RECORDING Q. What happens if the end of the tape is reached Q. When I pause and then resume a recording, the end during playback or search? of the recording before the pause is overlapped by A.
  • Page 31: Roubleshooting

    ● This is normal. 3. The playback picture is blurred or ● The video heads may be dirty. The heads must be cleaned. Consult interrupted, even though TV your JVC dealer. broadcasts are clear. RECORDING SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1.
  • Page 32: Timer Recording

    TIMER RECORDING POSSIBLE CAUSE CORRECTIVE ACTION SYMPTOM ● The clock and/or the timer have Set the clock and/or timer correctly. 1. Timer recording won’t work. been set incorrectly. ● The timer is not engaged. Press TIMER and check to make sure that ‰...
  • Page 33: Front View

    INDEX FRONT VIEW 3 4 5 PLAY POWER MENU VIDEO AUDIO STOP/EJECT PAUSE 8 Front Display Panel ( pg. 35) 1 POWER Button ( pg. 6) 9 Remote Control Sensor 2 Cassette Loading Slot 0 Channel [CH] 5 ∞ Button ( pg.
  • Page 34: Rear View

    REAR VIEW ANT. IN AUDIO RF OUT VIDEO CH3 CH4 1 Power Cord ( pg. 4) 4 CH (Channel) 3/4 Switch ( pg. 4) 2 ANT. IN Connector ( pg. 4) 5 VIDEO/AUDIO Output Connectors ( pg. 29) 3 Lithium Battery Compartment ( pg.
  • Page 35: Remote Control

    POWER, TV/VCR, TV CH +/–. TV VOL +/– can be used without holding down TV. NOTES: ● Depending on the type of JVC TV, there may be cases where some or all functions cannot be operated using the remote control.
  • Page 36 3. DO NOT place heavy objects on the VCR or remote may cause the playback picture to become blurred or control. interrupted. Be sure to contact your nearest JVC dealer if 4. DO NOT place anything which might spill on top of the such troubles occur.
  • Page 37 MEMO...
  • Page 38 MEMO...
  • Page 39 This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...

Table of Contents