Basic Connections; Nstalling Your New Vcr - JVC HR-J456EN Instruction Manual

4
EN

Basic Connections

Connect the power plug to an
AC outlet before installing the
lithium battery. (See below)
AC Outlet
AC Power Cord
Back of VCR
Back of VCR
VIDE
CH3 CH4
Be sure to connect the power plug to an AC outlet first
before installing the lithium battery; otherwise, the battery's
service life will be drastically shortened.
1
2
TV
3
Release tab
INSTALLING YOUR NEW VCR
Antenna or Cable
Flat Feeder
Matching Transformer
(not supplied)
75 ohm terminal
Installing/Removing the lithium battery
1
Make sure that the power plug is connected to an AC outlet
and turn off the VCR power.
2 Open the battery cover while pressing the release tab as
illustrated.
3 Insert a lithium battery with the plus (+) side facing you and
push it in.
To remove the lithium battery, press the latch A down-
ward using a pointed non-metallic object, then pull out
the lithium battery.
4
Close the battery cover until it clicks in place.
4
A
ANT. IN
(Antenna or Cable input)
Coaxial Cable
PAUSE/
IN OUT
AV ANT. IN
COMPU
R
-LINK
AUDIO
L
RF OUT
VIDEO
CH3 CH4
RF Cable (supplied)
RF OUT